From: Jimmy Assarsson extja@kvaser.com
commit 262d7a52ba27525e3c1203230c9f0524e48bbb34 upstream.
Under certain circumstances we send two EFLUSH commands, resulting in two EFLUSH ack packets, while only expecting a single EFLUSH ack. This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD) interrupt and remove the code handling it. Now we only send EFLUSH command after receiving status packet with "Init detected" (IDET) bit set.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/kvaser_pciefd.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)
--- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -533,7 +533,7 @@ static int kvaser_pciefd_set_tx_irq(stru KVASER_PCIEFD_KCAN_IRQ_TOF | KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TAE | KVASER_PCIEFD_KCAN_IRQ_TAL | KVASER_PCIEFD_KCAN_IRQ_FDIC | KVASER_PCIEFD_KCAN_IRQ_BPP | - KVASER_PCIEFD_KCAN_IRQ_TAR | KVASER_PCIEFD_KCAN_IRQ_TFD; + KVASER_PCIEFD_KCAN_IRQ_TAR;
iowrite32(msk, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
@@ -581,7 +581,7 @@ static void kvaser_pciefd_start_controll
spin_lock_irqsave(&can->lock, irq); iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG); - iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TFD, + iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
status = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_STAT_REG); @@ -624,7 +624,7 @@ static int kvaser_pciefd_bus_on(struct k iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG);
- iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TFD, + iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
mode = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_MODE_REG); @@ -1009,8 +1009,7 @@ static int kvaser_pciefd_setup_can_ctrls SET_NETDEV_DEV(netdev, &pcie->pci->dev);
iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG); - iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | - KVASER_PCIEFD_KCAN_IRQ_TFD, + iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG);
pcie->can[i] = can; @@ -1439,9 +1438,6 @@ static int kvaser_pciefd_handle_status_p cmd = KVASER_PCIEFD_KCAN_CMD_AT; cmd |= ++can->cmd_seq << KVASER_PCIEFD_KCAN_CMD_SEQ_SHIFT; iowrite32(cmd, can->reg_base + KVASER_PCIEFD_KCAN_CMD_REG); - - iowrite32(KVASER_PCIEFD_KCAN_IRQ_TFD, - can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); } else if (p->header[0] & KVASER_PCIEFD_SPACK_IDET && p->header[0] & KVASER_PCIEFD_SPACK_IRM && cmdseq == (p->header[1] & KVASER_PCIEFD_PACKET_SEQ_MSK) && @@ -1730,15 +1726,6 @@ static int kvaser_pciefd_transmit_irq(st if (irq & KVASER_PCIEFD_KCAN_IRQ_TOF) netdev_err(can->can.dev, "Tx FIFO overflow\n");
- if (irq & KVASER_PCIEFD_KCAN_IRQ_TFD) { - u8 count = ioread32(can->reg_base + - KVASER_PCIEFD_KCAN_TX_NPACKETS_REG) & 0xff; - - if (count == 0) - iowrite32(KVASER_PCIEFD_KCAN_CTRL_EFLUSH, - can->reg_base + KVASER_PCIEFD_KCAN_CTRL_REG); - } - if (irq & KVASER_PCIEFD_KCAN_IRQ_BPP) netdev_err(can->can.dev, "Fail to change bittiming, when not in reset mode\n");