5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miquel Raynal miquel.raynal@bootlin.com
commit 3e01d5254698ea3d18e09d96b974c762328352cd upstream.
The NAND core complies with the ONFI specification, which itself mentions that after any program or erase operation, a status check should be performed to see whether the operation was finished *and* successful.
The NAND core offers helpers to finish a page write (sending the "PAGE PROG" command, waiting for the NAND chip to be ready again, and checking the operation status). But in some cases, advanced controller drivers might want to optimize this and craft their own page write helper to leverage additional hardware capabilities, thus not always using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page write because the final cycles are automatically managed by the hardware. In this case, the additional care must be taken to manually perform the final status check.
Let's read the NAND chip status at the end of the page write helper and return -EIO upon error.
Cc: stable@vger.kernel.org Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Reported-by: Aviram Dali aviramd@marvell.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Tested-by: Ravi Chandra Minnikanti rminnikanti@marvell.com Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-1-miquel.raynal@boot... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mtd/nand/raw/marvell_nand.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -1148,6 +1148,7 @@ static int marvell_nfc_hw_ecc_hmg_do_wri .ndcb[2] = NDCB2_ADDR5_PAGE(page), }; unsigned int oob_bytes = lt->spare_bytes + (raw ? lt->ecc_bytes : 0); + u8 status; int ret;
/* NFCv2 needs more information about the operation being executed */ @@ -1181,7 +1182,18 @@ static int marvell_nfc_hw_ecc_hmg_do_wri
ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(sdr->tPROG_max)); - return ret; + if (ret) + return ret; + + /* Check write status on the chip side */ + ret = nand_status_op(chip, &status); + if (ret) + return ret; + + if (status & NAND_STATUS_FAIL) + return -EIO; + + return 0; }
static int marvell_nfc_hw_ecc_hmg_write_page_raw(struct nand_chip *chip, @@ -1610,6 +1622,7 @@ static int marvell_nfc_hw_ecc_bch_write_ int data_len = lt->data_bytes; int spare_len = lt->spare_bytes; int chunk, ret; + u8 status;
marvell_nfc_select_target(chip, chip->cur_cs);
@@ -1646,6 +1659,14 @@ static int marvell_nfc_hw_ecc_bch_write_ if (ret) return ret;
+ /* Check write status on the chip side */ + ret = nand_status_op(chip, &status); + if (ret) + return ret; + + if (status & NAND_STATUS_FAIL) + return -EIO; + return 0; }