4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Torokhov dmitry.torokhov@gmail.com
commit 6abe534f0776d2437c8302f58d8eb5abd483e926 upstream.
Currently we register the pass-through serio port when we probe the F03 RMI function, and then, in sensor configure phase, we unmask interrupts. Unfortunately this is too late, as other drivers are free probe devices attached to the serio port as soon as it is probed. Because interrupts are masked, the IO times out, which may result in not being able to detect trackpoints on the pass-through port.
To fix the issue we implement open() and close() methods for the pass-through serio port and unmask interrupts from there. We also move creation of the pass-through port form probe to configure stage, as RMI driver does not enable transport interrupt until all functions are probed (we should change this, but this is a separate topic).
We also try to clear the pending data before unmasking interrupts, because some devices like to spam the system with multiple 0xaa 0x00 announcements, which may interfere with us trying to query ID of the device.
Fixes: c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03") Reviewed-by: Lyude Paul lyude@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/input/rmi4/rmi_f03.c | 64 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 54 insertions(+), 10 deletions(-)
--- a/drivers/input/rmi4/rmi_f03.c +++ b/drivers/input/rmi4/rmi_f03.c @@ -32,6 +32,7 @@ struct f03_data { struct rmi_function *fn;
struct serio *serio; + bool serio_registered;
unsigned int overwrite_buttons;
@@ -138,6 +139,37 @@ static int rmi_f03_initialize(struct f03 return 0; }
+static int rmi_f03_pt_open(struct serio *serio) +{ + struct f03_data *f03 = serio->port_data; + struct rmi_function *fn = f03->fn; + const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE; + const u16 data_addr = fn->fd.data_base_addr + RMI_F03_OB_OFFSET; + u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE]; + int error; + + /* + * Consume any pending data. Some devices like to spam with + * 0xaa 0x00 announcements which may confuse us as we try to + * probe the device. + */ + error = rmi_read_block(fn->rmi_dev, data_addr, &obs, ob_len); + if (!error) + rmi_dbg(RMI_DEBUG_FN, &fn->dev, + "%s: Consumed %*ph (%d) from PS2 guest\n", + __func__, ob_len, obs, ob_len); + + return fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask); +} + +static void rmi_f03_pt_close(struct serio *serio) +{ + struct f03_data *f03 = serio->port_data; + struct rmi_function *fn = f03->fn; + + fn->rmi_dev->driver->clear_irq_bits(fn->rmi_dev, fn->irq_mask); +} + static int rmi_f03_register_pt(struct f03_data *f03) { struct serio *serio; @@ -148,6 +180,8 @@ static int rmi_f03_register_pt(struct f0
serio->id.type = SERIO_PS_PSTHRU; serio->write = rmi_f03_pt_write; + serio->open = rmi_f03_pt_open; + serio->close = rmi_f03_pt_close; serio->port_data = f03;
strlcpy(serio->name, "Synaptics RMI4 PS/2 pass-through", @@ -184,17 +218,27 @@ static int rmi_f03_probe(struct rmi_func f03->device_count);
dev_set_drvdata(dev, f03); - - error = rmi_f03_register_pt(f03); - if (error) - return error; - return 0; }
static int rmi_f03_config(struct rmi_function *fn) { - fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask); + struct f03_data *f03 = dev_get_drvdata(&fn->dev); + int error; + + if (!f03->serio_registered) { + error = rmi_f03_register_pt(f03); + if (error) + return error; + + f03->serio_registered = true; + } else { + /* + * We must be re-configuring the sensor, just enable + * interrupts for this function. + */ + fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask); + }
return 0; } @@ -204,7 +248,7 @@ static int rmi_f03_attention(struct rmi_ struct rmi_device *rmi_dev = fn->rmi_dev; struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev); struct f03_data *f03 = dev_get_drvdata(&fn->dev); - u16 data_addr = fn->fd.data_base_addr; + const u16 data_addr = fn->fd.data_base_addr + RMI_F03_OB_OFFSET; const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE; u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE]; u8 ob_status; @@ -226,8 +270,7 @@ static int rmi_f03_attention(struct rmi_ drvdata->attn_data.size -= ob_len; } else { /* Grab all of the data registers, and check them for data */ - error = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET, - &obs, ob_len); + error = rmi_read_block(fn->rmi_dev, data_addr, &obs, ob_len); if (error) { dev_err(&fn->dev, "%s: Failed to read F03 output buffers: %d\n", @@ -266,7 +309,8 @@ static void rmi_f03_remove(struct rmi_fu { struct f03_data *f03 = dev_get_drvdata(&fn->dev);
- serio_unregister_port(f03->serio); + if (f03->serio_registered) + serio_unregister_port(f03->serio); }
struct rmi_function_handler rmi_f03_handler = {