From: Christoph Niedermaier cniedermaier@dh-electronics.com
[ Upstream commit 892943d7729bbfb2edeed9e323eba9a5cec21c49 ]
According to Renesas Electronics (formerly Dialog Semiconductor), the standard AUTO mode of the PMIC DA9061 can lead to stability problems depending on the hardware revision. It is recommended to set a defined mode such as PFM or PWM permanently. So set and limit the mode for buck 1, 2 and 3 to a fixed one.
Fixes: 611b6c891e40 ("ARM: dts: imx6ull-dhcom: Add DH electronics DHCOM i.MX6ULL SoM and PDK2 board") Signed-off-by: Christoph Niedermaier cniedermaier@dh-electronics.com Reviewed-by: Marek Vasut marex@denx.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6ull-dhcor-som.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi index 5882c7565f649..32a6022625d97 100644 --- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/regulator/dlg,da9063-regulator.h> #include "imx6ull.dtsi"
/ { @@ -84,16 +85,20 @@ onkey {
regulators { vdd_soc_in_1v4: buck1 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>; regulator-max-microvolt = <1400000>; regulator-min-microvolt = <1400000>; regulator-name = "vdd_soc_in_1v4"; };
vcc_3v3: buck2 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "vcc_3v3"; @@ -106,8 +111,10 @@ vcc_3v3: buck2 { * the voltage is set to 1.5V. */ vcc_ddr_1v35: buck3 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <1500000>; regulator-min-microvolt = <1500000>; regulator-name = "vcc_ddr_1v35";