From: Sherry Sun sherry.sun@nxp.com
[ Upstream commit 2d4fb72b681205eed4553d8802632bd3270be3ba ]
According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should enable the pull up, so need to set bit8 to 1. The original pinctl value 0x49 is incorrect and needs to be changed to 0x140, same as uart1 and uart3.
Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Reviewed-by: Haibo Chen haibo.chen@nxp.com Signed-off-by: Sherry Sun sherry.sun@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com Reviewed-by: Rasmus Villemoes rasmus.villemoes@prevas.dk Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 3c4369d6468c..3f424a8937f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -383,8 +383,8 @@
pinctrl_uart2: uart2grp { fsl,pins = < - MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 - MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 >; };