On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas mw@semihalf.com wrote:
From: Alex Leibovich alexl@marvell.com
Automatic Clock Gating is a feature used for the power consumption optimisation. It turned out that during early init phase it may prevent the stable voltage switch to 1.8V - due to that on some platfroms an endless printout in dmesg can be observed: "mmc1: 1.8V regulator output did not became stable" Fix the problem by disabling the ACG at very beginning of the sdhci_init and let that be enabled later.
Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") Signed-off-by: Alex Leibovich alexl@marvell.com Signed-off-by: Marcin Wojtas mw@semihalf.com Cc: stable@vger.kernel.org
Applied for fixes (by fixing the typos), thanks!
Kind regards Uffe
drivers/mmc/host/sdhci-xenon.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c index c67611fdaa8a..4b05f6fdefb4 100644 --- a/drivers/mmc/host/sdhci-xenon.c +++ b/drivers/mmc/host/sdhci-xenon.c @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, /* Disable tuning request and auto-retuning again */ xenon_retune_setup(host);
xenon_set_acg(host, true);
/*
* The ACG should be turned off at the early init time, in order
* to solve a possile issues with the 1.8V regulator stabilization.
* The feature is enabled in later stage.
*/
xenon_set_acg(host, false); xenon_set_sdclk_off_idle(host, sdhc_id, false);
-- 2.29.0