On Tue, May 02, 2023 at 08:48:06AM -0700, Tony Nguyen wrote:
From: Song Yoong Siang yoong.siang.song@intel.com
igc_configure_rx_ring() function will be called as part of XDP program setup. If Rx hardware timestamp is enabled prio to XDP program setup, this timestamp enablement will be overwritten when buffer size is written into SRRCTL register.
Thus, this commit read the register value before write to SRRCTL register. This commit is tested by using xdp_hw_metadata bpf selftest tool. The tool enables Rx hardware timestamp and then attach XDP program to igc driver. It will display hardware timestamp of UDP packet with port number 9092. Below are detail of test steps and results.
Command on DUT: sudo ./xdp_hw_metadata <interface name>
Command on Link Partner: echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
Result before this patch: skb hwtstamp is not found!
Result after this patch: found skb hwtstamp = 1677800973.642836757
Optionally, read PHC to confirm the values obtained are almost the same: Command: sudo ./testptp -d /dev/ptp0 -g Result: clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy") Cc: stable@vger.kernel.org # 5.14+ Signed-off-by: Song Yoong Siang yoong.siang.song@intel.com Reviewed-by: Jacob Keller jacob.e.keller@intel.com Reviewed-by: Jesper Dangaard Brouer brouer@redhat.com Tested-by: Jesper Dangaard Brouer brouer@redhat.com Tested-by: Naama Meir naamax.meir@linux.intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com
drivers/net/ethernet/intel/igc/igc_base.h | 11 ++++++++--- drivers/net/ethernet/intel/igc/igc_main.c | 7 +++++-- 2 files changed, 13 insertions(+), 5 deletions(-)
Thanks, Reviewed-by: Leon Romanovsky leonro@nvidia.com