From: Enguerrand de Ribaucourt enguerrand.de-ribaucourt@savoirfairelinux.com
commit 0e597e2affb90d6ea48df6890d882924acf71e19 upstream.
Some RX errors, notably when disconnecting the cable, increase the RCSR register. Once half full (0x7fff), an interrupt flood is generated. I measured ~3k/s interrupts even after the RX errors transfer was stopped.
Since we don't read and clear the RCSR register, we should disable this interrupt.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission") Signed-off-by: Enguerrand de Ribaucourt enguerrand.de-ribaucourt@savoirfairelinux.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/dp83822.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -197,8 +197,7 @@ static int dp83822_config_intr(struct ph if (misr_status < 0) return misr_status;
- misr_status |= (DP83822_RX_ERR_HF_INT_EN | - DP83822_ANEG_COMPLETE_INT_EN | + misr_status |= (DP83822_ANEG_COMPLETE_INT_EN | DP83822_DUP_MODE_CHANGE_INT_EN | DP83822_SPEED_CHANGED_INT_EN | DP83822_LINK_STAT_INT_EN |