From: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com
[ Upstream commit 899199292b14b7c735808a37517de4dd2160c300 ]
This adds a quirk for SPCC 256GB NVMe 1.3 drive which fixes timeouts and I/O errors due to the fact that the controller does not properly handle the Write Zeroes command:
[ 2745.659527] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 5.10.6-BET #1 [ 2745.659528] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 3001 12/04/2020 [ 2776.138874] nvme nvme1: I/O 414 QID 3 timeout, aborting [ 2776.138886] nvme nvme1: I/O 415 QID 3 timeout, aborting [ 2776.138891] nvme nvme1: I/O 416 QID 3 timeout, aborting [ 2776.138895] nvme nvme1: I/O 417 QID 3 timeout, aborting [ 2776.138912] nvme nvme1: Abort status: 0x0 [ 2776.138921] nvme nvme1: I/O 428 QID 3 timeout, aborting [ 2776.138922] nvme nvme1: Abort status: 0x0 [ 2776.138925] nvme nvme1: Abort status: 0x0 [ 2776.138974] nvme nvme1: Abort status: 0x0 [ 2776.138977] nvme nvme1: Abort status: 0x0 [ 2806.346792] nvme nvme1: I/O 414 QID 3 timeout, reset controller [ 2806.363566] nvme nvme1: 15/0/0 default/read/poll queues [ 2836.554298] nvme nvme1: I/O 415 QID 3 timeout, disable controller [ 2836.672064] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672072] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672074] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672076] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672078] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672080] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672082] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672083] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672085] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672087] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672121] nvme nvme1: failed to mark controller live state [ 2836.672123] nvme nvme1: Removing after probe failure status: -19 [ 2836.689016] Aborting journal on device dm-0-8. [ 2836.689024] Buffer I/O error on dev dm-0, logical block 25198592, lost sync page write [ 2836.689027] JBD2: Error -5 detected when updating journal superblock for dm-0-8.
Reported-by: Bradley Chapman chapman6235@comcast.net Signed-off-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Tested-by: Bradley Chapman chapman6235@comcast.net Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 77f615568194d..a4b169408bbf0 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3248,6 +3248,8 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE(0x15b7, 0x2001), /* Sandisk Skyhawk */ .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, + { PCI_DEVICE(0x1d97, 0x2263), /* SPCC */ + .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001), .driver_data = NVME_QUIRK_SINGLE_VECTOR }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) },