Linux 6.9+ is unable to start a degraded RAID1 array with one drive, when that drive has a write-mostly flag set. During such an attempt, the following assertion in bio_split() is hit:
BUG_ON(sectors <= 0);
Call Trace: ? bio_split+0x96/0xb0 ? exc_invalid_op+0x53/0x70 ? bio_split+0x96/0xb0 ? asm_exc_invalid_op+0x1b/0x20 ? bio_split+0x96/0xb0 ? raid1_read_request+0x890/0xd20 ? __call_rcu_common.constprop.0+0x97/0x260 raid1_make_request+0x81/0xce0 ? __get_random_u32_below+0x17/0x70 ? new_slab+0x2b3/0x580 md_handle_request+0x77/0x210 md_submit_bio+0x62/0xa0 __submit_bio+0x17b/0x230 submit_bio_noacct_nocheck+0x18e/0x3c0 submit_bio_noacct+0x244/0x670
After investigation, it turned out that choose_slow_rdev() does not set the value of max_sectors in some cases and because of it, raid1_read_request calls bio_split with sectors == 0.
Fix it by filling in this variable.
This bug was introduced in commit dfa8ecd167c1 ("md/raid1: factor out choose_slow_rdev() from read_balance()") but apparently hidden until commit 0091c5a269ec ("md/raid1: factor out helpers to choose the best rdev from read_balance()") shortly thereafter.
Cc: stable@vger.kernel.org # 6.9.x+ Signed-off-by: Mateusz Jończyk mat.jonczyk@o2.pl Fixes: dfa8ecd167c1 ("md/raid1: factor out choose_slow_rdev() from read_balance()") Cc: Song Liu song@kernel.org Cc: Yu Kuai yukuai3@huawei.com Cc: Paul Luse paul.e.luse@linux.intel.com Cc: Xiao Ni xni@redhat.com Cc: Mariusz Tkaczyk mariusz.tkaczyk@linux.intel.com Link: https://lore.kernel.org/linux-raid/20240706143038.7253-1-mat.jonczyk@o2.pl/
--
Tested on both Linux 6.10 and 6.9.8.
Inside a VM, mdadm testsuite for RAID1 on 6.10 did not find any problems: ./test --dev=loop --no-error --raidtype=raid1 (on 6.9.8 there was one failure, caused by external bitmap support not compiled in).
Notes: - I was reliably getting deadlocks when adding / removing devices on such an array - while the array was loaded with fsstress with 20 concurrent processes. When the array was idle or loaded with fsstress with 8 processes, no such deadlocks happened in my tests. This occurred also on unpatched Linux 6.8.0 though, but not on 6.1.97-rc1, so this is likely an independent regression (to be investigated). - I was also getting deadlocks when adding / removing the bitmap on the array in similar conditions - this happened on Linux 6.1.97-rc1 also though. fsstress with 8 concurrent processes did cause it only once during many tests. - in my testing, there was once a problem with hot adding an internal bitmap to the array: mdadm: Cannot add bitmap while array is resyncing or reshaping etc. mdadm: failed to set internal bitmap. even though no such reshaping was happening according to /proc/mdstat. This seems unrelated, though. --- drivers/md/raid1.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 7b8a71ca66dd..82f70a4ce6ed 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -680,6 +680,7 @@ static int choose_slow_rdev(struct r1conf *conf, struct r1bio *r1_bio, len = r1_bio->sectors; read_len = raid1_check_read_range(rdev, this_sector, &len); if (read_len == r1_bio->sectors) { + *max_sectors = read_len; update_read_sectors(conf, disk, this_sector, read_len); return disk; }
base-commit: 256abd8e550ce977b728be79a74e1729438b4948