6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Akhil P Oommen quic_akhilpo@quicinc.com
commit f561db72a663f8a73c2250bf3244ce1ce221bed7 upstream.
It was observed on sc7180 (A618 gpu) that GPU votes for GX rail and CNOC BCM nodes were not removed after GPU suspend. This was because we skipped sending 'prepare-slumber' request to gmu during suspend sequence in some cases. So, make sure we always call prepare-slumber hfi during suspend. Also, calling prepare-slumber without a prior oob-gpu handshake messes up gmu firmware's internal state. So, do that when required.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen quic_akhilpo@quicinc.com Patchwork: https://patchwork.freedesktop.org/patch/639569/ Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 82 ++++++++++++++++++---------------- 1 file changed, 44 insertions(+), 38 deletions(-)
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c @@ -1042,50 +1042,51 @@ static void a6xx_gmu_shutdown(struct a6x struct a6xx_gpu *a6xx_gpu = container_of(gmu, struct a6xx_gpu, gmu); struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; u32 val; + int ret;
/* - * The GMU may still be in slumber unless the GPU started so check and - * skip putting it back into slumber if so + * GMU firmware's internal power state gets messed up if we send "prepare_slumber" hfi when + * oob_gpu handshake wasn't done after the last wake up. So do a dummy handshake here when + * required */ - val = gmu_read(gmu, REG_A6XX_GPU_GMU_CX_GMU_RPMH_POWER_STATE); + if (adreno_gpu->base.needs_hw_init) { + if (a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET)) + goto force_off;
- if (val != 0xf) { - int ret = a6xx_gmu_wait_for_idle(gmu); - - /* If the GMU isn't responding assume it is hung */ - if (ret) { - a6xx_gmu_force_off(gmu); - return; - } - - a6xx_bus_clear_pending_transactions(adreno_gpu, a6xx_gpu->hung); - - /* tell the GMU we want to slumber */ - ret = a6xx_gmu_notify_slumber(gmu); - if (ret) { - a6xx_gmu_force_off(gmu); - return; - } - - ret = gmu_poll_timeout(gmu, - REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS, val, - !(val & A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS_GPUBUSYIGNAHB), - 100, 10000); - - /* - * Let the user know we failed to slumber but don't worry too - * much because we are powering down anyway - */ - - if (ret) - DRM_DEV_ERROR(gmu->dev, - "Unable to slumber GMU: status = 0%x/0%x\n", - gmu_read(gmu, - REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS), - gmu_read(gmu, - REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS2)); + a6xx_gmu_clear_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET); }
+ ret = a6xx_gmu_wait_for_idle(gmu); + + /* If the GMU isn't responding assume it is hung */ + if (ret) + goto force_off; + + a6xx_bus_clear_pending_transactions(adreno_gpu, a6xx_gpu->hung); + + /* tell the GMU we want to slumber */ + ret = a6xx_gmu_notify_slumber(gmu); + if (ret) + goto force_off; + + ret = gmu_poll_timeout(gmu, + REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS, val, + !(val & A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS_GPUBUSYIGNAHB), + 100, 10000); + + /* + * Let the user know we failed to slumber but don't worry too + * much because we are powering down anyway + */ + + if (ret) + DRM_DEV_ERROR(gmu->dev, + "Unable to slumber GMU: status = 0%x/0%x\n", + gmu_read(gmu, + REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS), + gmu_read(gmu, + REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_STATUS2)); + /* Turn off HFI */ a6xx_hfi_stop(gmu);
@@ -1094,6 +1095,11 @@ static void a6xx_gmu_shutdown(struct a6x
/* Tell RPMh to power off the GPU */ a6xx_rpmh_stop(gmu); + + return; + +force_off: + a6xx_gmu_force_off(gmu); }