From: Mario Limonciello mario.limonciello@amd.com
commit 2a821fc3136d5d99dcb9de152be8a052ca27d870 upstream.
Donghun reports that a notebook that has an AMD Ryzen 5700U but supports S3 has problems with USB after resuming from suspend. The issue was bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir").
As this issue only happens on S3, narrow the broken D3cold quirk to only run in s2idle.
Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir") Reported-and-tested-by: Donghun Yoon donghun.yoon@lge.com Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 12 ++++++++++-- drivers/usb/host/xhci.h | 2 +- 2 files changed, 11 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/acpi.h> #include <linux/reset.h> +#include <linux/suspend.h>
#include "xhci.h" #include "xhci-trace.h" @@ -194,7 +195,7 @@ static void xhci_pci_quirks(struct devic
if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) - xhci->quirks |= XHCI_BROKEN_D3COLD; + xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
if (pdev->vendor == PCI_VENDOR_ID_INTEL) { xhci->quirks |= XHCI_LPM_SUPPORT; @@ -609,9 +610,16 @@ static int xhci_pci_suspend(struct usb_h * Systems with the TI redriver that loses port status change events * need to have the registers polled during D3, so avoid D3cold. */ - if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD)) + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pci_d3cold_disable(pdev);
+#ifdef CONFIG_SUSPEND + /* d3cold is broken, but only when s2idle is used */ + if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE && + xhci->quirks & (XHCI_BROKEN_D3COLD_S2I)) + pci_d3cold_disable(pdev); +#endif + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_quirk(hcd);
--- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1895,7 +1895,7 @@ struct xhci_hcd { #define XHCI_DISABLE_SPARSE BIT_ULL(38) #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) -#define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_BROKEN_D3COLD_S2I BIT_ULL(41) #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) #define XHCI_RESET_TO_DEFAULT BIT_ULL(44)