Hi,
On Thu 13 Apr 23, 10:27, Chris Morgan wrote:
On Thu, Apr 13, 2023 at 04:43:47PM +0200, Sascha Hauer wrote:
During a suspend/resume cycle the VO power domain will be disabled and the VOP2 registers will reset to their default values. After that the cached register values will be out of sync and the read/modify/write operations we do on the window registers will result in bogus values written. Fix this by re-initializing the register cache each time we enable the VOP2. With this the VOP2 will show a picture after a suspend/resume cycle whereas without this the screen stays dark.
I was actually tracking the very same bug this week!
Thanks a lot for fixing this, it would certainly have taken me a while to think about regmap cache maintenance. Good thinking :)
Your patch fixes the issue on my side but I have a suggestion below:
Fixes: 604be85547ce4 ("drm/rockchip: Add VOP2 driver") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer s.hauer@pengutronix.de
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c index ba3b817895091..d9daa686b014d 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c @@ -215,6 +215,8 @@ struct vop2 { struct vop2_win win[]; }; +static const struct regmap_config vop2_regmap_config;
static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc) { return container_of(crtc, struct vop2_video_port, crtc); @@ -839,6 +841,12 @@ static void vop2_enable(struct vop2 *vop2) return; }
- ret = regmap_reinit_cache(vop2->map, &vop2_regmap_config);
- if (ret) {
drm_err(vop2->drm, "failed to reinit cache: %d\n", ret);return;- }
It seems that regmap has regcache_mark_dirty() for this purpose, which is perhaps more adapted than reinitializing cache (unless I'm missing something). Note that I haven't tested it at this point.
Cheers,
Paul
if (vop2->data->soc_id == 3566) vop2_writel(vop2, RK3568_OTP_WIN_EN, 1); -- 2.39.2
I confirmed this works on my Anbernic RG353P which uses the rk3566 SOC. Before applying the patch I displayed a color pattern with modetest before suspend and it appeared correctly. Then I suspended and resumed the device, attempted to display the same color pattern, and only got a single pixel on an otherwise blank display. After applying the patch I performed the same test and the color pattern appeared correctly both before and after suspend (and the display was no longer blank after resume from suspend).
Tested-by: Chris Morgan macromorgan@hotmail.com