From: Brian Norris briannorris@chromium.org
commit 771acc7e4a6e5dba779cb1a7fd851a164bc81033 upstream.
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq().
We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it.
Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by: Brian Norris briannorris@chromium.org Reviewed-by: Matthias Kaehlcke mka@chromium.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/bluetooth/btusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2888,6 +2888,7 @@ static int btusb_config_oob_wake(struct return 0; }
+ irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler, 0, "OOB Wake-on-BT", data); if (ret) { @@ -2902,7 +2903,6 @@ static int btusb_config_oob_wake(struct }
data->oob_wake_irq = irq; - disable_irq(irq); bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq); return 0; }