6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Horatiu Vultur horatiu.vultur@microchip.com
[ Upstream commit 4fb679040d9f758eeb3b4d01bbde6405bf20e64e ]
When the interrupt is enabled, the function lan8841_config_intr tries to clear any pending interrupts by reading the interrupt status, then checks the return value for errors and then continue to enable the interrupt. It has been seen that once the system gets out of sleep mode, the interrupt status has the value 0x400 meaning that the PHY detected that the link was in low power. That is correct value but the problem is that the check is wrong. We try to check for errors but we return an error also in this case which is not an error. Therefore fix this by returning only when there is an error.
Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY") Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com Reviewed-by: Suman Ghosh sumang@marvell.com Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.c... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/micrel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index e4c06336bd254..fc31fcfb0cdb4 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -3450,7 +3450,7 @@ static int lan8841_config_intr(struct phy_device *phydev)
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { err = phy_read(phydev, LAN8814_INTS); - if (err) + if (err < 0) return err;
/* Enable / disable interrupts. It is OK to enable PTP interrupt @@ -3466,6 +3466,14 @@ static int lan8841_config_intr(struct phy_device *phydev) return err;
err = phy_read(phydev, LAN8814_INTS); + if (err < 0) + return err; + + /* Getting a positive value doesn't mean that is an error, it + * just indicates what was the status. Therefore make sure to + * clear the value and say that there is no error. + */ + err = 0; }
return err;