On 9/7/25 15:45, Kurt Borja wrote:
On Sun Sep 7, 2025 at 5:19 PM -05, Guenter Roeck wrote:
On 9/7/25 15:06, Kurt Borja wrote:
All sht2x chips share the same communication protocol so add support for them.
Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja kuurtb@gmail.com
Documentation/hwmon/sht21.rst | 11 +++++++++++ drivers/hwmon/sht21.c | 3 +++ 2 files changed, 14 insertions(+)
diff --git a/Documentation/hwmon/sht21.rst b/Documentation/hwmon/sht21.rst index 1bccc8e8aac8d3532ec17dcdbc6a172102877085..65f85ca68ecac1cba6ad23f783fd648305c40927 100644 --- a/Documentation/hwmon/sht21.rst +++ b/Documentation/hwmon/sht21.rst @@ -2,6 +2,17 @@ Kernel driver sht21 =================== Supported chips:
- Sensirion SHT20
- Prefix: 'sht20'
- Addresses scanned: none
- Datasheet: Publicly available at the Sensirion website
- https://www.sensirion.com/file/datasheet_sht20
Too many empty lines.
The next entries are also separated by 3 lines. I did it like that for symmetry.
Two wrongs don't make it right.
Guenter
Please add SHT20 to Kconfig as well.
Sure!
* Sensirion SHT21 diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c index 97327313529b467ed89d8f6b06c2d78efd54efbf..a2748659edc262dac9d87771f849a4fc0a29d981 100644 --- a/drivers/hwmon/sht21.c +++ b/drivers/hwmon/sht21.c @@ -275,7 +275,10 @@ static int sht21_probe(struct i2c_client *client) /* Device ID table */ static const struct i2c_device_id sht21_id[] = {
- { "sht20" }, { "sht21" },
- { "sht25" },
- { "sht2x" },
AFAICS there is no sht2x chip.
{ }}; MODULE_DEVICE_TABLE(i2c, sht21_id);