From: Lyude Paul lyude@redhat.com
commit d7787cc04e0a1f2043264d1550465081096bd065 upstream.
While I thought I had this correct (since it actually did reject modes like I expected during testing), Ville Syrjala from Intel pointed out that the logic here isn't correct. max_clock refers to the max data rate supported by the DP encoder. So, limiting it to the output of ds_clock (which refers to the maximum dotclock of the downstream DP device) doesn't make any sense. Additionally, since we're using the connector's bpc as the canonical BPC we should use this in mode_valid until we support dynamically setting the bpp based on bandwidth constraints.
https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
For more info.
So, let's rewrite this using Ville's advice.
v2: * Ville pointed out I mixed up the dotclock and the link rate. So fix that... * ...and also rename all the variables in this function to be more appropriately labeled so I stop mixing them up. * Reuse the bpp from the connector for now until we have dynamic bpp selection. * Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we should also have been doing from the start
Signed-off-by: Lyude Paul lyude@redhat.com Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation") Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Lyude Paul lyude@redhat.com Cc: Ben Skeggs bskeggs@redhat.com Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/gpu/drm/nouveau/nouveau_dp.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -114,7 +114,8 @@ nv50_dp_mode_valid(struct drm_connector unsigned *out_clock) { const unsigned min_clock = 25000; - unsigned max_clock, clock = mode->clock; + unsigned int max_rate, mode_rate, clock = mode->clock; + const u8 bpp = connector->display_info.bpc * 3;
if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp->caps.dp_interlace) return MODE_NO_INTERLACE; @@ -122,12 +123,13 @@ nv50_dp_mode_valid(struct drm_connector if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) clock *= 2;
- max_clock = outp->dp.link_nr * outp->dp.link_bw; - clock = mode->clock * (connector->display_info.bpc * 3) / 10; + max_rate = outp->dp.link_nr * outp->dp.link_bw; + mode_rate = DIV_ROUND_UP(clock * bpp, 8); + if (mode_rate > max_rate) + return MODE_CLOCK_HIGH; + if (clock < min_clock) return MODE_CLOCK_LOW; - if (clock > max_clock) - return MODE_CLOCK_HIGH;
if (out_clock) *out_clock = clock;