From: Pali Rohár pali@kernel.org
[ Upstream commit e93033aff684641f71a436ca7a9d2a742126baaf ]
When CPU frequency is at 250 MHz and set_rate() is called with 500 MHz (L1) quickly followed by a call with 1 GHz (L0), the CPU does not necessarily stay in L1 for at least 20ms as is required by Marvell errata.
This situation happens frequently with the ondemand cpufreq governor and can be also reproduced with userspace governor. In most cases it causes CPU to crash.
This change fixes the above issue and ensures that the CPU always stays in L1 for at least 20ms when switching from any state to L0.
Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Pali Rohár pali@kernel.org Acked-by: Stephen Boyd sboyd@kernel.org Acked-by: Gregory CLEMENT gregory.clement@bootlin.com Tested-by: Tomasz Maciej Nowak tmn505@gmail.com Tested-by: Anders Trier Olesen anders.trier.olesen@gmail.com Tested-by: Philip Soares philips@netisense.com Fixes: 61c40f35f5cd ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz") Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/mvebu/armada-37xx-periph.c | 45 ++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c index a05449cb0e3b..5d10733d6c04 100644 --- a/drivers/clk/mvebu/armada-37xx-periph.c +++ b/drivers/clk/mvebu/armada-37xx-periph.c @@ -74,6 +74,7 @@ struct clk_pm_cpu { void __iomem *reg_div; u8 shift_div; struct regmap *nb_pm_base; + unsigned long l1_expiration; };
#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw) @@ -492,22 +493,52 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate, * 2. Sleep 20ms for stabling VDD voltage * 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz). */ -static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base) +static void clk_pm_cpu_set_rate_wa(struct clk_pm_cpu *pm_cpu, + unsigned int new_level, unsigned long rate, + struct regmap *base) { unsigned int cur_level;
- if (rate < 1000 * 1000 * 1000) - return; - regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; - if (cur_level <= ARMADA_37XX_DVFS_LOAD_1) + + if (cur_level == new_level) + return; + + /* + * System wants to go to L1 on its own. If we are going from L2/L3, + * remember when 20ms will expire. If from L0, set the value so that + * next switch to L0 won't have to wait. + */ + if (new_level == ARMADA_37XX_DVFS_LOAD_1) { + if (cur_level == ARMADA_37XX_DVFS_LOAD_0) + pm_cpu->l1_expiration = jiffies; + else + pm_cpu->l1_expiration = jiffies + msecs_to_jiffies(20); return; + } + + /* + * If we are setting to L2/L3, just invalidate L1 expiration time, + * sleeping is not needed. + */ + if (rate < 1000*1000*1000) + goto invalidate_l1_exp; + + /* + * We are going to L0 with rate >= 1GHz. Check whether we have been at + * L1 for long enough time. If not, go to L1 for 20ms. + */ + if (pm_cpu->l1_expiration && jiffies >= pm_cpu->l1_expiration) + goto invalidate_l1_exp;
regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD, ARMADA_37XX_NB_CPU_LOAD_MASK, ARMADA_37XX_DVFS_LOAD_1); msleep(20); + +invalidate_l1_exp: + pm_cpu->l1_expiration = 0; }
static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, @@ -541,7 +572,9 @@ static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, reg = ARMADA_37XX_NB_CPU_LOAD; mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
- clk_pm_cpu_set_rate_wa(rate, base); + /* Apply workaround when base CPU frequency is 1000 or 1200 MHz */ + if (parent_rate >= 1000*1000*1000) + clk_pm_cpu_set_rate_wa(pm_cpu, load_level, rate, base);
regmap_update_bits(base, reg, mask, load_level);