From: Russell King (Oracle) rmk+kernel@armlinux.org.uk
[ Upstream commit 80662f4fd4771bc9c7cc4abdfbe866ebd1179621 ]
On PHY state change the phylink_resolve() function can read stale information from the MAC and report incorrect link speed and duplex to the kernel message log.
Example with a Marvell 88X3310 PHY connected to a SerDes port on Marvell 88E6393X switch: - PHY driver triggers state change due to PHY interface mode being changed from 10gbase-r to 2500base-x due to copper change in speed from 10Gbps to 2.5Gbps, but the PHY itself either hasn't yet changed its interface to the host, or the interrupt about loss of SerDes link hadn't arrived yet (there can be a delay of several milliseconds for this), so we still think that the 10gbase-r mode is up - phylink_resolve() - phylink_mac_pcs_get_state() - this fills in speed=10g link=up - interface mode is updated to 2500base-x but speed is left at 10Gbps - phylink_major_config() - interface is changed to 2500base-x - phylink_link_up() - mv88e6xxx_mac_link_up() - .port_set_speed_duplex() - speed is set to 10Gbps - reports "Link is Up - 10Gbps/Full" to dmesg
Afterwards when the interrupt finally arrives for mv88e6xxx, another resolve is forced in which we get the correct speed from phylink_mac_pcs_get_state(), but since the interface is not being changed anymore, we don't call phylink_major_config() but only phylink_mac_config(), which does not set speed/duplex anymore.
To fix this, we need to force the link down and trigger another resolve on PHY interface change event.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/phylink.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 899496f089d2e..8279e08dad9db 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -644,6 +644,7 @@ static void phylink_resolve(struct work_struct *w) struct phylink_link_state link_state; struct net_device *ndev = pl->netdev; bool mac_config = false; + bool retrigger = false; bool cur_link_state;
mutex_lock(&pl->state_mutex); @@ -657,6 +658,7 @@ static void phylink_resolve(struct work_struct *w) link_state.link = false; } else if (pl->mac_link_dropped) { link_state.link = false; + retrigger = true; } else { switch (pl->cur_link_an_mode) { case MLO_AN_PHY: @@ -680,6 +682,15 @@ static void phylink_resolve(struct work_struct *w)
/* Only update if the PHY link is up */ if (pl->phydev && pl->phy_state.link) { + /* If the interface has changed, force a + * link down event if the link isn't already + * down, and re-resolve. + */ + if (link_state.interface != + pl->phy_state.interface) { + retrigger = true; + link_state.link = false; + } link_state.interface = pl->phy_state.interface;
/* If we have a PHY, we need to update with @@ -721,7 +732,7 @@ static void phylink_resolve(struct work_struct *w) else phylink_link_up(pl, link_state); } - if (!link_state.link && pl->mac_link_dropped) { + if (!link_state.link && retrigger) { pl->mac_link_dropped = false; queue_work(system_power_efficient_wq, &pl->resolve); }