From: Florian Fainelli f.fainelli@gmail.com
[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]
phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used.
Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Acked-by: Doug Berger opendmb@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -346,11 +346,12 @@ int bcmgenet_mii_probe(struct net_device struct bcmgenet_priv *priv = netdev_priv(dev); struct device_node *dn = priv->pdev->dev.of_node; struct phy_device *phydev; - u32 phy_flags; + u32 phy_flags = 0; int ret;
/* Communicate the integrated PHY revision */ - phy_flags = priv->gphy_rev; + if (priv->internal_phy) + phy_flags = priv->gphy_rev;
/* Initialize link state variables that bcmgenet_mii_setup() uses */ priv->old_link = -1;