From: Lukas Wunner lukas@wunner.de
commit dc76697d7e933d5e299116f219c890568785ea15 upstream.
Unbinding the bcm2835aux UART driver raises the following error if the maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS):
(NULL device *): Removing wrong port: a6f80333 != fa20408b
That's because bcm2835aux_serial_probe() retrieves UART line number 1 from the devicetree and stores it in data->uart.port.line, while serial8250_register_8250_port() instead uses UART line number 0, which is stored in data->line.
On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line, which contains the wrong number. Fix it.
The issue does not occur if the maximum number of 8250 UARTs is >= 2.
Fixes: bdc5f3009580 ("serial: bcm2835: add driver for bcm2835-aux-uart") Signed-off-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v4.6+ Cc: Martin Sperl kernel@martin.sperl.org Reviewed-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Tested-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Link: https://lore.kernel.org/r/912ccf553c5258135c6d7e8f404a101ef320f0f4.157917522... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/tty/serial/8250/8250_bcm2835aux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -115,7 +115,7 @@ static int bcm2835aux_serial_remove(stru { struct bcm2835aux_data *data = platform_get_drvdata(pdev);
- serial8250_unregister_port(data->uart.port.line); + serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk);
return 0;