From: Guenter Roeck linux@roeck-us.net
[ Upstream commit 16ba51b5dcd3f6dde2e51d5ccc86313119dcf889 ]
Tests with a real chip and a closer look into the datasheet show that MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support of the respective attributes for this chip.
Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit attributes to solve the problem.
Cc: Josh Lehan krellan@google.com Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver") Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/lm90.c | 86 +++++++++++++++++++++++++------------------- 1 file changed, 49 insertions(+), 37 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 72969ea83d82e..6597d055e09d8 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -35,13 +35,14 @@ * explicitly as max6659, or if its address is not 0x4c. * These chips lack the remote temperature offset feature. * - * This driver also supports the MAX6654 chip made by Maxim. This chip can - * be at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is - * otherwise similar to MAX6657/MAX6658/MAX6659. Extended range is available - * by setting the configuration register accordingly, and is done during - * initialization. Extended precision is only available at conversion rates - * of 1 Hz and slower. Note that extended precision is not enabled by - * default, as this driver initializes all chips to 2 Hz by design. + * This driver also supports the MAX6654 chip made by Maxim. This chip can be + * at 9 different addresses, similar to MAX6680/MAX6681. The MAX6654 is similar + * to MAX6657/MAX6658/MAX6659, but does not support critical temperature + * limits. Extended range is available by setting the configuration register + * accordingly, and is done during initialization. Extended precision is only + * available at conversion rates of 1 Hz and slower. Note that extended + * precision is not enabled by default, as this driver initializes all chips + * to 2 Hz by design. * * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and * MAX6692 chips made by Maxim. These are again similar to the LM86, @@ -188,6 +189,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */ #define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/ #define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */ +#define LM90_HAVE_CRIT (1 << 10)/* Chip supports CRIT/OVERT register */
/* LM90 status */ #define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */ @@ -354,38 +356,43 @@ struct lm90_params { static const struct lm90_params lm90_params[] = { [adm1032] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 10, }, [adt7461] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP + | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 10, }, [g781] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, }, [lm86] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, }, [lm90] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, }, [lm99] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, }, [max6646] = { + .flags = LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 6, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, @@ -396,50 +403,50 @@ static const struct lm90_params lm90_params[] = { .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6657] = { - .flags = LM90_PAUSE_FOR_CONFIG, + .flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6659] = { - .flags = LM90_HAVE_EMERGENCY, + .flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6680] = { - .flags = LM90_HAVE_OFFSET, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 7, }, [max6696] = { .flags = LM90_HAVE_EMERGENCY - | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3, + | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT, .alert_alarms = 0x1c7c, .max_convrate = 6, .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [w83l771] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 8, }, [sa56004] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT, .alert_alarms = 0x7b, .max_convrate = 9, .reg_local_ext = SA56004_REG_R_LOCAL_TEMPL, }, [tmp451] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 9, .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, }, [tmp461] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT, .alert_alarms = 0x7c, .max_convrate = 9, .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, @@ -668,20 +675,22 @@ static int lm90_update_limits(struct device *dev) struct i2c_client *client = data->client; int val;
- val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT); - if (val < 0) - return val; - data->temp8[LOCAL_CRIT] = val; + if (data->flags & LM90_HAVE_CRIT) { + val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT); + if (val < 0) + return val; + data->temp8[LOCAL_CRIT] = val;
- val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT); - if (val < 0) - return val; - data->temp8[REMOTE_CRIT] = val; + val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT); + if (val < 0) + return val; + data->temp8[REMOTE_CRIT] = val;
- val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST); - if (val < 0) - return val; - data->temp_hyst = val; + val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST); + if (val < 0) + return val; + data->temp_hyst = val; + }
val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH); if (val < 0) @@ -1902,11 +1911,14 @@ static int lm90_probe(struct i2c_client *client) info->config = data->channel_config;
data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | - HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | - HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM; + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM; data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | - HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_MIN_ALARM | - HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT; + HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_FAULT; + + if (data->flags & LM90_HAVE_CRIT) { + data->channel_config[0] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST; + data->channel_config[1] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST; + }
if (data->flags & LM90_HAVE_OFFSET) data->channel_config[1] |= HWMON_T_OFFSET;