From: Anssi Hannula anssi.hannula@bitwise.fi
commit cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream.
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and completed when the device sends CMD_FLUSH_QUEUE_RESP.
This causes completion of uninitialized completion if the device sends CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a response to a flush by a previously bound driver, or a misbehaving device).
Fix that by initializing flush_comp in kvaser_usb_init_one() like the other completions.
This issue is only triggerable after RX URBs have been set up, i.e. the interface has been opened at least once.
Cc: stable@vger.kernel.org Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Jimmy Assarsson extja@kvaser.com Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 1 + drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c @@ -690,6 +690,7 @@ static int kvaser_usb_init_one(struct kv init_usb_anchor(&priv->tx_submitted); init_completion(&priv->start_comp); init_completion(&priv->stop_comp); + init_completion(&priv->flush_comp); priv->can.ctrlmode_supported = 0;
priv->dev = dev; --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -1886,7 +1886,7 @@ static int kvaser_usb_hydra_flush_queue( { int err;
- init_completion(&priv->flush_comp); + reinit_completion(&priv->flush_comp);
err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_FLUSH_QUEUE, priv->channel);