6.17-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Vecera ivecera@redhat.com
[ Upstream commit ebb1031c51377829b21e1c58e8eccc479e4921b7 ]
Refactor DPLL initialization and move DPLL (de)registration, monitoring control, fetching device invariant parameters and phase offset measurement block setup to separate functions.
Use these new functions during device probe and teardown functions and during changes to the clock_id devlink parameter.
These functions will also be used in the next patch implementing devlink flash, where this functionality is likewise required.
Reviewed-by: Przemek Kitszel przemyslaw.kitszel@intel.com Signed-off-by: Ivan Vecera ivecera@redhat.com Link: https://patch.msgid.link/20250909091532.11790-5-ivecera@redhat.com Signed-off-by: Jakub Kicinski kuba@kernel.org Stable-dep-of: fcb8b32a68fd ("dpll: zl3073x: Handle missing or corrupted flash configuration") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dpll/zl3073x/core.c | 207 +++++++++++++++++++++------------ drivers/dpll/zl3073x/core.h | 3 + drivers/dpll/zl3073x/devlink.c | 18 +-- 3 files changed, 142 insertions(+), 86 deletions(-)
diff --git a/drivers/dpll/zl3073x/core.c b/drivers/dpll/zl3073x/core.c index 7ebcfc5ec1f09..0df210cec08da 100644 --- a/drivers/dpll/zl3073x/core.c +++ b/drivers/dpll/zl3073x/core.c @@ -809,21 +809,142 @@ zl3073x_dev_periodic_work(struct kthread_work *work) msecs_to_jiffies(500)); }
+/** + * zl3073x_dev_phase_meas_setup - setup phase offset measurement + * @zldev: pointer to zl3073x_dev structure + * + * Enable phase offset measurement block, set measurement averaging factor + * and enable DPLL-to-its-ref phase measurement for all DPLLs. + * + * Returns: 0 on success, <0 on error + */ +static int +zl3073x_dev_phase_meas_setup(struct zl3073x_dev *zldev) +{ + struct zl3073x_dpll *zldpll; + u8 dpll_meas_ctrl, mask = 0; + int rc; + + /* Read DPLL phase measurement control register */ + rc = zl3073x_read_u8(zldev, ZL_REG_DPLL_MEAS_CTRL, &dpll_meas_ctrl); + if (rc) + return rc; + + /* Setup phase measurement averaging factor */ + dpll_meas_ctrl &= ~ZL_DPLL_MEAS_CTRL_AVG_FACTOR; + dpll_meas_ctrl |= FIELD_PREP(ZL_DPLL_MEAS_CTRL_AVG_FACTOR, 3); + + /* Enable DPLL measurement block */ + dpll_meas_ctrl |= ZL_DPLL_MEAS_CTRL_EN; + + /* Update phase measurement control register */ + rc = zl3073x_write_u8(zldev, ZL_REG_DPLL_MEAS_CTRL, dpll_meas_ctrl); + if (rc) + return rc; + + /* Enable DPLL-to-connected-ref measurement for each channel */ + list_for_each_entry(zldpll, &zldev->dplls, list) + mask |= BIT(zldpll->id); + + return zl3073x_write_u8(zldev, ZL_REG_DPLL_PHASE_ERR_READ_MASK, mask); +} + +/** + * zl3073x_dev_start - Start normal operation + * @zldev: zl3073x device pointer + * @full: perform full initialization + * + * The function starts normal operation, which means registering all DPLLs and + * their pins, and starting monitoring. If full initialization is requested, + * the function additionally initializes the phase offset measurement block and + * fetches hardware-invariant parameters. + * + * Return: 0 on success, <0 on error + */ +int zl3073x_dev_start(struct zl3073x_dev *zldev, bool full) +{ + struct zl3073x_dpll *zldpll; + int rc; + + if (full) { + /* Fetch device state */ + rc = zl3073x_dev_state_fetch(zldev); + if (rc) + return rc; + + /* Setup phase offset measurement block */ + rc = zl3073x_dev_phase_meas_setup(zldev); + if (rc) { + dev_err(zldev->dev, + "Failed to setup phase measurement\n"); + return rc; + } + } + + /* Register all DPLLs */ + list_for_each_entry(zldpll, &zldev->dplls, list) { + rc = zl3073x_dpll_register(zldpll); + if (rc) { + dev_err_probe(zldev->dev, rc, + "Failed to register DPLL%u\n", + zldpll->id); + return rc; + } + } + + /* Perform initial firmware fine phase correction */ + rc = zl3073x_dpll_init_fine_phase_adjust(zldev); + if (rc) { + dev_err_probe(zldev->dev, rc, + "Failed to init fine phase correction\n"); + return rc; + } + + /* Start monitoring */ + kthread_queue_delayed_work(zldev->kworker, &zldev->work, 0); + + return 0; +} + +/** + * zl3073x_dev_stop - Stop normal operation + * @zldev: zl3073x device pointer + * + * The function stops the normal operation that mean deregistration of all + * DPLLs and their pins and stop monitoring. + * + * Return: 0 on success, <0 on error + */ +void zl3073x_dev_stop(struct zl3073x_dev *zldev) +{ + struct zl3073x_dpll *zldpll; + + /* Stop monitoring */ + kthread_cancel_delayed_work_sync(&zldev->work); + + /* Unregister all DPLLs */ + list_for_each_entry(zldpll, &zldev->dplls, list) { + if (zldpll->dpll_dev) + zl3073x_dpll_unregister(zldpll); + } +} + static void zl3073x_dev_dpll_fini(void *ptr) { struct zl3073x_dpll *zldpll, *next; struct zl3073x_dev *zldev = ptr;
- /* Stop monitoring thread */ + /* Stop monitoring and unregister DPLLs */ + zl3073x_dev_stop(zldev); + + /* Destroy monitoring thread */ if (zldev->kworker) { - kthread_cancel_delayed_work_sync(&zldev->work); kthread_destroy_worker(zldev->kworker); zldev->kworker = NULL; }
- /* Release DPLLs */ + /* Free all DPLLs */ list_for_each_entry_safe(zldpll, next, &zldev->dplls, list) { - zl3073x_dpll_unregister(zldpll); list_del(&zldpll->list); zl3073x_dpll_free(zldpll); } @@ -839,7 +960,7 @@ zl3073x_devm_dpll_init(struct zl3073x_dev *zldev, u8 num_dplls)
INIT_LIST_HEAD(&zldev->dplls);
- /* Initialize all DPLLs */ + /* Allocate all DPLLs */ for (i = 0; i < num_dplls; i++) { zldpll = zl3073x_dpll_alloc(zldev, i); if (IS_ERR(zldpll)) { @@ -849,25 +970,9 @@ zl3073x_devm_dpll_init(struct zl3073x_dev *zldev, u8 num_dplls) goto error; }
- rc = zl3073x_dpll_register(zldpll); - if (rc) { - dev_err_probe(zldev->dev, rc, - "Failed to register DPLL%u\n", i); - zl3073x_dpll_free(zldpll); - goto error; - } - list_add_tail(&zldpll->list, &zldev->dplls); }
- /* Perform initial firmware fine phase correction */ - rc = zl3073x_dpll_init_fine_phase_adjust(zldev); - if (rc) { - dev_err_probe(zldev->dev, rc, - "Failed to init fine phase correction\n"); - goto error; - } - /* Initialize monitoring thread */ kthread_init_delayed_work(&zldev->work, zl3073x_dev_periodic_work); kworker = kthread_run_worker(0, "zl3073x-%s", dev_name(zldev->dev)); @@ -875,9 +980,14 @@ zl3073x_devm_dpll_init(struct zl3073x_dev *zldev, u8 num_dplls) rc = PTR_ERR(kworker); goto error; } - zldev->kworker = kworker; - kthread_queue_delayed_work(zldev->kworker, &zldev->work, 0); + + /* Start normal operation */ + rc = zl3073x_dev_start(zldev, true); + if (rc) { + dev_err_probe(zldev->dev, rc, "Failed to start device\n"); + goto error; + }
/* Add devres action to release DPLL related resources */ rc = devm_add_action_or_reset(zldev->dev, zl3073x_dev_dpll_fini, zldev); @@ -892,46 +1002,6 @@ zl3073x_devm_dpll_init(struct zl3073x_dev *zldev, u8 num_dplls) return rc; }
-/** - * zl3073x_dev_phase_meas_setup - setup phase offset measurement - * @zldev: pointer to zl3073x_dev structure - * @num_channels: number of DPLL channels - * - * Enable phase offset measurement block, set measurement averaging factor - * and enable DPLL-to-its-ref phase measurement for all DPLLs. - * - * Returns: 0 on success, <0 on error - */ -static int -zl3073x_dev_phase_meas_setup(struct zl3073x_dev *zldev, int num_channels) -{ - u8 dpll_meas_ctrl, mask; - int i, rc; - - /* Read DPLL phase measurement control register */ - rc = zl3073x_read_u8(zldev, ZL_REG_DPLL_MEAS_CTRL, &dpll_meas_ctrl); - if (rc) - return rc; - - /* Setup phase measurement averaging factor */ - dpll_meas_ctrl &= ~ZL_DPLL_MEAS_CTRL_AVG_FACTOR; - dpll_meas_ctrl |= FIELD_PREP(ZL_DPLL_MEAS_CTRL_AVG_FACTOR, 3); - - /* Enable DPLL measurement block */ - dpll_meas_ctrl |= ZL_DPLL_MEAS_CTRL_EN; - - /* Update phase measurement control register */ - rc = zl3073x_write_u8(zldev, ZL_REG_DPLL_MEAS_CTRL, dpll_meas_ctrl); - if (rc) - return rc; - - /* Enable DPLL-to-connected-ref measurement for each channel */ - for (i = 0, mask = 0; i < num_channels; i++) - mask |= BIT(i); - - return zl3073x_write_u8(zldev, ZL_REG_DPLL_PHASE_ERR_READ_MASK, mask); -} - /** * zl3073x_dev_probe - initialize zl3073x device * @zldev: pointer to zl3073x device @@ -999,17 +1069,6 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev, return dev_err_probe(zldev->dev, rc, "Failed to initialize mutex\n");
- /* Fetch device state */ - rc = zl3073x_dev_state_fetch(zldev); - if (rc) - return rc; - - /* Setup phase offset measurement block */ - rc = zl3073x_dev_phase_meas_setup(zldev, chip_info->num_channels); - if (rc) - return dev_err_probe(zldev->dev, rc, - "Failed to setup phase measurement\n"); - /* Register DPLL channels */ rc = zl3073x_devm_dpll_init(zldev, chip_info->num_channels); if (rc) diff --git a/drivers/dpll/zl3073x/core.h b/drivers/dpll/zl3073x/core.h index 71af2c8001109..84e52d5521a34 100644 --- a/drivers/dpll/zl3073x/core.h +++ b/drivers/dpll/zl3073x/core.h @@ -111,6 +111,9 @@ struct zl3073x_dev *zl3073x_devm_alloc(struct device *dev); int zl3073x_dev_probe(struct zl3073x_dev *zldev, const struct zl3073x_chip_info *chip_info);
+int zl3073x_dev_start(struct zl3073x_dev *zldev, bool full); +void zl3073x_dev_stop(struct zl3073x_dev *zldev); + /********************** * Registers operations **********************/ diff --git a/drivers/dpll/zl3073x/devlink.c b/drivers/dpll/zl3073x/devlink.c index 7e7fe726ee37a..c2e9f7aca3c84 100644 --- a/drivers/dpll/zl3073x/devlink.c +++ b/drivers/dpll/zl3073x/devlink.c @@ -86,14 +86,12 @@ zl3073x_devlink_reload_down(struct devlink *devlink, bool netns_change, struct netlink_ext_ack *extack) { struct zl3073x_dev *zldev = devlink_priv(devlink); - struct zl3073x_dpll *zldpll;
if (action != DEVLINK_RELOAD_ACTION_DRIVER_REINIT) return -EOPNOTSUPP;
- /* Unregister all DPLLs */ - list_for_each_entry(zldpll, &zldev->dplls, list) - zl3073x_dpll_unregister(zldpll); + /* Stop normal operation */ + zl3073x_dev_stop(zldev);
return 0; } @@ -107,7 +105,6 @@ zl3073x_devlink_reload_up(struct devlink *devlink, { struct zl3073x_dev *zldev = devlink_priv(devlink); union devlink_param_value val; - struct zl3073x_dpll *zldpll; int rc;
if (action != DEVLINK_RELOAD_ACTION_DRIVER_REINIT) @@ -125,13 +122,10 @@ zl3073x_devlink_reload_up(struct devlink *devlink, zldev->clock_id = val.vu64; }
- /* Re-register all DPLLs */ - list_for_each_entry(zldpll, &zldev->dplls, list) { - rc = zl3073x_dpll_register(zldpll); - if (rc) - dev_warn(zldev->dev, - "Failed to re-register DPLL%u\n", zldpll->id); - } + /* Restart normal operation */ + rc = zl3073x_dev_start(zldev, false); + if (rc) + dev_warn(zldev->dev, "Failed to re-start normal operation\n");
*actions_performed = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);