Thanks.
On 8/31/24 3:41 PM, Krzysztof Kozlowski wrote:
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Parthiban Nallathambi parthiban@linumiz.com
Thanks, Parthiban
.../dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi index 6bb12e0bbc7e..50654dbf62e0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi @@ -339,14 +339,14 @@ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0 }; pinctrl_uart1: uart1grp {
fsl,pin = <
fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1;};pinctrl_uart2: uart2grp {
fsl,pin = <
fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1@@ -355,7 +355,7 @@ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 }; pinctrl_uart3: uart3grp {
fsl,pin = <
fsl,pins = < MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1@@ -364,21 +364,21 @@ MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 }; pinctrl_uart4: uart4grp {
fsl,pin = <
fsl,pins = < MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1;};pinctrl_uart5: uart5grp {
fsl,pin = <
fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1;};pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pin = <
fsl,pins = < MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059;};