The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 5370c31e84b0e0999c7b5ff949f4e104def35584 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025102624-thirsty-otter-d285@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 5370c31e84b0e0999c7b5ff949f4e104def35584 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Date: Fri, 17 Oct 2025 16:18:29 +0100 Subject: [PATCH] net: ravb: Enforce descriptor type ordering MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
Ensure the TX descriptor type fields are published in a safe order so the DMA engine never begins processing a descriptor chain before all descriptor fields are fully initialised.
For multi-descriptor transmits the driver writes DT_FEND into the last descriptor and DT_FSTART into the first. The DMA engine begins processing when it observes DT_FSTART. Move the dma_wmb() barrier so it executes immediately after DT_FEND and immediately before writing DT_FSTART (and before DT_FSINGLE in the single-descriptor case). This guarantees that all prior CPU writes to the descriptor memory are visible to the device before DT_FSTART is seen.
This avoids a situation where compiler/CPU reordering could publish DT_FSTART ahead of DT_FEND or other descriptor fields, allowing the DMA to start on a partially initialised chain and causing corrupted transmissions or TX timeouts. Such a failure was observed on RZ/G2L with an RT kernel as transmit queue timeouts and device resets.
Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Cc: stable@vger.kernel.org Co-developed-by: Fabrizio Castro fabrizio.castro.jz@renesas.com Signed-off-by: Fabrizio Castro fabrizio.castro.jz@renesas.com Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Niklas Söderlund niklas.soderlund+renesas@ragnatech.se Link: https://patch.msgid.link/20251017151830.171062-4-prabhakar.mahadev-lad.rj@bp... Signed-off-by: Jakub Kicinski kuba@kernel.org
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 9d3bd65b85ff..044ee83c63bb 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -2211,13 +2211,25 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev)
skb_tx_timestamp(skb); } - /* Descriptor type must be set after all the above writes */ - dma_wmb(); + if (num_tx_desc > 1) { desc->die_dt = DT_FEND; desc--; + /* When using multi-descriptors, DT_FEND needs to get written + * before DT_FSTART, but the compiler may reorder the memory + * writes in an attempt to optimize the code. + * Use a dma_wmb() barrier to make sure DT_FEND and DT_FSTART + * are written exactly in the order shown in the code. + * This is particularly important for cases where the DMA engine + * is already running when we are running this code. If the DMA + * sees DT_FSTART without the corresponding DT_FEND it will enter + * an error condition. + */ + dma_wmb(); desc->die_dt = DT_FSTART; } else { + /* Descriptor type must be set after all the above writes */ + dma_wmb(); desc->die_dt = DT_FSINGLE; } ravb_modify(ndev, TCCR, TCCR_TSRQ0 << q, TCCR_TSRQ0 << q);