From: Adrian Hunter adrian.hunter@intel.com
commit df57d73276b863af1debc48546b0e59e44998a55 upstream.
For Intel controllers, SDHCI_RESET_ALL resets also CQHCI registers. Normally, SDHCI_RESET_ALL is not used while CQHCI is enabled, but that can happen on the error path. e.g. if mmc_cqe_recovery() fails, mmc_blk_reset() is called which, for a eMMC that does not support HW Reset, will cycle the bus power and the driver will perform SDHCI_RESET_ALL.
So whenever performing SDHCI_RESET_ALL ensure CQHCI is deactivated. That will force the driver to reinitialize CQHCI when it is next used.
A similar change was done already for sdhci-msm, and other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL.
Fixes: 8ee82bda230fc9 ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Cc: stable@vger.kernel.org # 5.4.x: 0ffa6cfbd949: mmc: cqhci: Add cqhci_deactivate() Cc: stable@vger.kernel.org # 5.4+ Signed-off-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20200819121848.16967-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mmc/host/sdhci-pci-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -232,6 +232,14 @@ static void sdhci_pci_dumpregs(struct mm sdhci_dumpregs(mmc_priv(mmc)); }
+static void sdhci_cqhci_reset(struct sdhci_host *host, u8 mask) +{ + if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) && + host->mmc->cqe_private) + cqhci_deactivate(host->mmc); + sdhci_reset(host, mask); +} + /*****************************************************************************\ * * * Hardware specific quirk handling * @@ -718,7 +726,7 @@ static const struct sdhci_ops sdhci_inte .set_power = sdhci_intel_set_power, .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_cqhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, .hw_reset = sdhci_pci_hw_reset, .irq = sdhci_cqhci_irq,