6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli s-vadapalli@ti.com
[ Upstream commit 9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08 ]
After 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0 causes Completion Timeouts when setting up MSI-X. These timeouts delay boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log] Fixes: 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus") Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@ti.co... Suggested-by: Bjorn Helgaas helgaas@kernel.org Suggested-by: Niklas Cassel cassel@kernel.org Suggested-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: Siddharth Vadapalli s-vadapalli@ti.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Niklas Cassel cassel@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pci-keystone.c | 52 ++++++++--------------- 1 file changed, 18 insertions(+), 34 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index 348a9f755d0ba..438aa5fa4c64b 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -291,6 +291,24 @@ static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp) { + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); + + /* Configure and set up BAR0 */ + ks_pcie_set_dbi_mode(ks_pcie); + + /* Enable BAR0 */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); + + ks_pcie_clear_dbi_mode(ks_pcie); + + /* + * For BAR0, just setting bus address for inbound writes (MSI) should + * be sufficient. Use physical address to avoid any conflicts. + */ + dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); + pp->msi_irq_chip = &ks_pcie_msi_irq_chip; return dw_pcie_allocate_domains(pp); } @@ -448,44 +466,10 @@ static struct pci_ops ks_child_pcie_ops = { .write = pci_generic_config_write, };
-/** - * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization - * @bus: A pointer to the PCI bus structure. - * - * This sets BAR0 to enable inbound access for MSI_IRQ register - */ -static int ks_pcie_v3_65_add_bus(struct pci_bus *bus) -{ - struct dw_pcie_rp *pp = bus->sysdata; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct keystone_pcie *ks_pcie = to_keystone_pcie(pci); - - if (!pci_is_root_bus(bus)) - return 0; - - /* Configure and set up BAR0 */ - ks_pcie_set_dbi_mode(ks_pcie); - - /* Enable BAR0 */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1); - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1); - - ks_pcie_clear_dbi_mode(ks_pcie); - - /* - * For BAR0, just setting bus address for inbound writes (MSI) should - * be sufficient. Use physical address to avoid any conflicts. - */ - dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start); - - return 0; -} - static struct pci_ops ks_pcie_ops = { .map_bus = dw_pcie_own_conf_map_bus, .read = pci_generic_config_read, .write = pci_generic_config_write, - .add_bus = ks_pcie_v3_65_add_bus, };
/**