From: Hugo Villeneuve hvilleneuve@dimonoff.com
[ Upstream commit 253be5b53c2792fb4384f8005b05421e6f040ee3 ]
For SOMs with an onboard PHY, the RESET_N pull-up resistor is currently deactivated in the pinmux configuration. When the pinmux code selects the GPIO function for this pin, with a default direction of input, this prevents the RESET_N pin from being taken to the proper 3.3V level (deasserted), and this results in the PHY being not detected since it is held in reset.
Taken from RESET_N pin description in ADIN13000 datasheet: This pin requires a 1K pull-up resistor to AVDD_3P3.
Activate the pull-up resistor to fix the issue.
Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve hvilleneuve@dimonoff.com Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index cbd9d124c80d0..c9d4fb75c21d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -351,7 +351,7 @@ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x159 >; };