From: Clark Wang xiaoning.wang@nxp.com
[ Upstream commit 525c9e5a32bd7951eae3f06d9d077fea51718a6c ]
Enable runtime pm support for spi-imx driver.
Signed-off-by: Clark Wang xiaoning.wang@nxp.com Link: https://lore.kernel.org/r/20200727063354.17031-1-xiaoning.wang@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Stable-dep-of: 11951c9e3f36 ("spi: imx: Don't skip cleanup in remove's error path") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-imx.c | 121 ++++++++++++++++++++++++++++++------------ 1 file changed, 88 insertions(+), 33 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 90793fc321358..95f1746a85d9d 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -13,7 +13,9 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> @@ -30,6 +32,8 @@ static bool use_dma = true; module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
+#define MXC_RPM_TIMEOUT 2000 /* 2000ms */ + #define MXC_CSPIRXDATA 0x00 #define MXC_CSPITXDATA 0x04 #define MXC_CSPICTRL 0x08 @@ -1532,20 +1536,16 @@ spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg) struct spi_imx_data *spi_imx = spi_master_get_devdata(master); int ret;
- ret = clk_enable(spi_imx->clk_per); - if (ret) - return ret; - - ret = clk_enable(spi_imx->clk_ipg); - if (ret) { - clk_disable(spi_imx->clk_per); + ret = pm_runtime_get_sync(spi_imx->dev); + if (ret < 0) { + dev_err(spi_imx->dev, "failed to enable clock\n"); return ret; }
ret = spi_imx->devtype_data->prepare_message(spi_imx, msg); if (ret) { - clk_disable(spi_imx->clk_ipg); - clk_disable(spi_imx->clk_per); + pm_runtime_mark_last_busy(spi_imx->dev); + pm_runtime_put_autosuspend(spi_imx->dev); }
return ret; @@ -1556,8 +1556,8 @@ spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg) { struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
- clk_disable(spi_imx->clk_ipg); - clk_disable(spi_imx->clk_per); + pm_runtime_mark_last_busy(spi_imx->dev); + pm_runtime_put_autosuspend(spi_imx->dev); return 0; }
@@ -1676,13 +1676,15 @@ static int spi_imx_probe(struct platform_device *pdev) goto out_master_put; }
- ret = clk_prepare_enable(spi_imx->clk_per); - if (ret) - goto out_master_put; + pm_runtime_enable(spi_imx->dev); + pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT); + pm_runtime_use_autosuspend(spi_imx->dev);
- ret = clk_prepare_enable(spi_imx->clk_ipg); - if (ret) - goto out_put_per; + ret = pm_runtime_get_sync(spi_imx->dev); + if (ret < 0) { + dev_err(spi_imx->dev, "failed to enable clock\n"); + goto out_runtime_pm_put; + }
spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); /* @@ -1692,7 +1694,7 @@ static int spi_imx_probe(struct platform_device *pdev) if (spi_imx->devtype_data->has_dmamode) { ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master); if (ret == -EPROBE_DEFER) - goto out_clk_put; + goto out_runtime_pm_put;
if (ret < 0) dev_err(&pdev->dev, "dma setup error %d, use pio\n", @@ -1707,19 +1709,20 @@ static int spi_imx_probe(struct platform_device *pdev) ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); - goto out_clk_put; + goto out_runtime_pm_put; }
dev_info(&pdev->dev, "probed\n");
- clk_disable(spi_imx->clk_ipg); - clk_disable(spi_imx->clk_per); + pm_runtime_mark_last_busy(spi_imx->dev); + pm_runtime_put_autosuspend(spi_imx->dev); + return ret;
-out_clk_put: - clk_disable_unprepare(spi_imx->clk_ipg); -out_put_per: - clk_disable_unprepare(spi_imx->clk_per); +out_runtime_pm_put: + pm_runtime_dont_use_autosuspend(spi_imx->dev); + pm_runtime_put_sync(spi_imx->dev); + pm_runtime_disable(spi_imx->dev); out_master_put: spi_master_put(master);
@@ -1734,30 +1737,82 @@ static int spi_imx_remove(struct platform_device *pdev)
spi_bitbang_stop(&spi_imx->bitbang);
- ret = clk_enable(spi_imx->clk_per); + ret = pm_runtime_get_sync(spi_imx->dev); + if (ret < 0) { + dev_err(spi_imx->dev, "failed to enable clock\n"); + return ret; + } + + writel(0, spi_imx->base + MXC_CSPICTRL); + + pm_runtime_dont_use_autosuspend(spi_imx->dev); + pm_runtime_put_sync(spi_imx->dev); + pm_runtime_disable(spi_imx->dev); + + spi_imx_sdma_exit(spi_imx); + spi_master_put(master); + + return 0; +} + +static int __maybe_unused spi_imx_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct spi_imx_data *spi_imx; + int ret; + + spi_imx = spi_master_get_devdata(master); + + ret = clk_prepare_enable(spi_imx->clk_per); if (ret) return ret;
- ret = clk_enable(spi_imx->clk_ipg); + ret = clk_prepare_enable(spi_imx->clk_ipg); if (ret) { - clk_disable(spi_imx->clk_per); + clk_disable_unprepare(spi_imx->clk_per); return ret; }
- writel(0, spi_imx->base + MXC_CSPICTRL); - clk_disable_unprepare(spi_imx->clk_ipg); + return 0; +} + +static int __maybe_unused spi_imx_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct spi_imx_data *spi_imx; + + spi_imx = spi_master_get_devdata(master); + clk_disable_unprepare(spi_imx->clk_per); - spi_imx_sdma_exit(spi_imx); - spi_master_put(master); + clk_disable_unprepare(spi_imx->clk_ipg); + + return 0; +}
+static int __maybe_unused spi_imx_suspend(struct device *dev) +{ + pinctrl_pm_select_sleep_state(dev); return 0; }
+static int __maybe_unused spi_imx_resume(struct device *dev) +{ + pinctrl_pm_select_default_state(dev); + return 0; +} + +static const struct dev_pm_ops imx_spi_pm = { + SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend, + spi_imx_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume) +}; + static struct platform_driver spi_imx_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = spi_imx_dt_ids, - }, + .pm = &imx_spi_pm, + }, .id_table = spi_imx_devtype, .probe = spi_imx_probe, .remove = spi_imx_remove,