From: Vicente Bergas vicencb@gmail.com
[ Upstream commit 88a20edf76091ee7f1bb459b89d714d53f0f8940 ]
The microSD card slot in the Sapphire board is not working because of several issues: 1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V and has a GPIO-based enable control. 2.- The vqmmc power supply can provide up to 3.3V, but it is capped in the DTS to just 3.0V because of the vmmc capability. This results in a conflict from the mmc driver requesting an unsupportable voltage range from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the range up to 3.3V. The hw should be able to stand this 0.3V tolerance. See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c. 3.- The card detect signal is non-working. There is a known conflict with jtag, but the workaround in drivers/soc/rockchip/grf.c does not work. Adding the broken-cd attribute to the DTS fixes the issue.
Signed-off-by: Vicente Bergas vicencb@gmail.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/rockchip/rk3399-sapphire.dtsi | 24 ++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index ce592a4c0c4cd..6e40133372a80 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -113,6 +113,19 @@ vin-supply = <&vcc_1v8>; };
+ vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -315,7 +328,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; @@ -490,6 +503,13 @@ }; };
+ sd { + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = + <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = @@ -537,6 +557,7 @@ };
&sdmmc { + broken-cd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -545,6 +566,7 @@ max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; };