6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunihiko Hayashi hayashi.kunihiko@socionext.com
[ Upstream commit 044f2fbaa2725696ecbf1f02ba7ab0a8ccb7e1ae ]
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from stmmac_platform layer.
However, these values are constrained by upper limits determined by the capabilities of each hardware feature. There is a risk that the upper bits will be truncated due to the calculation, so it's appropriate to limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree") Signed-off-by: Kunihiko Hayashi hayashi.kunihiko@socionext.com Reviewed-by: Yanteng Si si.yanteng@linux.dev Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 48ad12bca9566..d3d5c01f6dcba 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -7118,6 +7118,21 @@ static int stmmac_hw_init(struct stmmac_priv *priv) priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues; }
+ if (priv->dma_cap.rx_fifo_size && + priv->plat->rx_fifo_size > priv->dma_cap.rx_fifo_size) { + dev_warn(priv->device, + "Rx FIFO size (%u) exceeds dma capability\n", + priv->plat->rx_fifo_size); + priv->plat->rx_fifo_size = priv->dma_cap.rx_fifo_size; + } + if (priv->dma_cap.tx_fifo_size && + priv->plat->tx_fifo_size > priv->dma_cap.tx_fifo_size) { + dev_warn(priv->device, + "Tx FIFO size (%u) exceeds dma capability\n", + priv->plat->tx_fifo_size); + priv->plat->tx_fifo_size = priv->dma_cap.tx_fifo_size; + } + priv->hw->vlan_fail_q_en = (priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN); priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;