On 25/07/2025 13:52, Victor Shih wrote:
From: Victor Shih victor.shih@genesyslogic.com.tw
Due to a flaw in the hardware design, the GL9763e replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9763e PCI config. Therefore, the replay timer timeout must be masked.
Also rename the gli_set_gl9763e() to gl9763e_hw_setting() for consistency.
Should be a separate patch
Signed-off-by: Victor Shih victor.shih@genesyslogic.com.tw
It is preferred to have a fixes tag as well. What about
Fixes: 1ae1d2d6e555e ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
drivers/mmc/host/sdhci-pci-gli.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 98ee3191b02f..7165dde9b6b8 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -1753,7 +1753,7 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot) return ret; } -static void gli_set_gl9763e(struct sdhci_pci_slot *slot) +static void gl9763e_hw_setting(struct sdhci_pci_slot *slot) { struct pci_dev *pdev = slot->chip->pdev; u32 value; @@ -1782,6 +1782,9 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot) value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5); pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
- /* mask the replay timer timeout of AER */
- sdhci_gli_mask_replay_timer_timeout(pdev);
- pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); value &= ~GLI_9763E_VHS_REV; value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
@@ -1925,7 +1928,7 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot) gli_pcie_enable_msi(slot); host->mmc_host_ops.hs400_enhanced_strobe = gl9763e_hs400_enhanced_strobe;
- gli_set_gl9763e(slot);
- gl9763e_hw_setting(slot); sdhci_enable_v4_mode(host);
return 0;