4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Nyman mathias.nyman@linux.intel.com
commit 6cbcf596934c8e16d6288c7cc62dfb7ad8eadf15 upstream.
A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status.
Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake.
Add U1 and U2 to the possible link states when checking for finished port resume.
Cc: stable stable@vger.kernel.org Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-ring.c | 9 ++++++--- drivers/usb/host/xhci.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1645,10 +1645,13 @@ static void handle_port_status(struct xh } }
- if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 && - DEV_SUPERSPEED_ANY(temp)) { + if ((temp & PORT_PLC) && + DEV_SUPERSPEED_ANY(temp) && + ((temp & PORT_PLS_MASK) == XDEV_U0 || + (temp & PORT_PLS_MASK) == XDEV_U1 || + (temp & PORT_PLS_MASK) == XDEV_U2)) { xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - /* We've just brought the device into U0 through either the + /* We've just brought the device into U0/1/2 through either the * Resume state after a device remote wakeup, or through the * U3Exit state after a host-initiated resume. If it's a device * initiated remote wake, don't pass up the link state change, --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -311,6 +311,7 @@ struct xhci_op_regs { */ #define PORT_PLS_MASK (0xf << 5) #define XDEV_U0 (0x0 << 5) +#define XDEV_U1 (0x1 << 5) #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) #define XDEV_INACTIVE (0x6 << 5)