After media_pipeline_start() was called, the media graph is assumed to be validated. It won't be validated again if a second stream starts.
The imx-media-csi driver, however, changes hardware configuration in the link_validate() callback. This can result in started streams with misconfigured hardware.
In the concrete example, the ipu2_csi1_mux is driven by a parallel video input. After the media pipeline has been started with this configuration, a second stream is configured to use ipu1_csi0 with MIPI-CSI input from imx6-mipi-csi2. This may require the reconfiguration of ipu1_csi0 with ipu_set_csi_src_mux(). Since the media pipeline is already running, link_validate won't be called, and the ipu1_csi0 won't be reconfigured. The resulting video is broken, because the ipu1_csi0_mux is misconfigured, but no error is reported.
Move ipu_set_csi_src_mux from csi_link_validate to csi_start to ensure that input to ipu1_csi0 is configured correctly when starting the stream. This is a local reconfiguration in ipu1_csi0 and is possible while the media pipeline is running.
Signed-off-by: Michael Tretter m.tretter@pengutronix.de Fixes: 4a34ec8e470c ("[media] media: imx: Add CSI subdev driver") Cc: stable@vger.kernel.org --- drivers/staging/media/imx/imx-media-csi.c | 44 +++++++++++++++++-------------- 1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c index 55a7d8f38465..1bc644f73a9d 100644 --- a/drivers/staging/media/imx/imx-media-csi.c +++ b/drivers/staging/media/imx/imx-media-csi.c @@ -744,6 +744,28 @@ static int csi_setup(struct csi_priv *priv, return 0; }
+static void csi_set_src(struct csi_priv *priv, + struct v4l2_mbus_config *mbus_cfg) +{ + bool is_csi2; + + is_csi2 = !is_parallel_bus(mbus_cfg); + if (is_csi2) { + /* + * NOTE! It seems the virtual channels from the mipi csi-2 + * receiver are used only for routing by the video mux's, + * or for hard-wired routing to the CSI's. Once the stream + * enters the CSI's however, they are treated internally + * in the IPU as virtual channel 0. + */ + ipu_csi_set_mipi_datatype(priv->csi, 0, + &priv->format_mbus[CSI_SINK_PAD]); + } + + /* select either parallel or MIPI-CSI2 as input to CSI */ + ipu_set_csi_src_mux(priv->ipu, priv->csi_id, is_csi2); +} + static int csi_start(struct csi_priv *priv) { struct v4l2_mbus_config mbus_cfg = { .type = 0 }; @@ -760,6 +782,8 @@ static int csi_start(struct csi_priv *priv) input_fi = &priv->frame_interval[CSI_SINK_PAD]; output_fi = &priv->frame_interval[priv->active_output_pad];
+ csi_set_src(priv, &mbus_cfg); + /* start upstream */ ret = v4l2_subdev_call(priv->src_sd, video, s_stream, 1); ret = (ret && ret != -ENOIOCTLCMD) ? ret : 0; @@ -1130,7 +1154,6 @@ static int csi_link_validate(struct v4l2_subdev *sd, { struct csi_priv *priv = v4l2_get_subdevdata(sd); struct v4l2_mbus_config mbus_cfg = { .type = 0 }; - bool is_csi2; int ret;
ret = v4l2_subdev_link_validate_default(sd, link, @@ -1145,25 +1168,6 @@ static int csi_link_validate(struct v4l2_subdev *sd, return ret; }
- mutex_lock(&priv->lock); - - is_csi2 = !is_parallel_bus(&mbus_cfg); - if (is_csi2) { - /* - * NOTE! It seems the virtual channels from the mipi csi-2 - * receiver are used only for routing by the video mux's, - * or for hard-wired routing to the CSI's. Once the stream - * enters the CSI's however, they are treated internally - * in the IPU as virtual channel 0. - */ - ipu_csi_set_mipi_datatype(priv->csi, 0, - &priv->format_mbus[CSI_SINK_PAD]); - } - - /* select either parallel or MIPI-CSI2 as input to CSI */ - ipu_set_csi_src_mux(priv->ipu, priv->csi_id, is_csi2); - - mutex_unlock(&priv->lock); return ret; }