On Wed, Jun 12, 2024 at 10:22:56AM +0800, Kuangyi Chiang wrote:
Sometimes hub driver does not recognize USB device that is connected to external USB2.0 Hub when system resumes from S4.
This happens when xHCI driver issue Reset Device command to inform Etron xHCI host that USB device has been reset.
Seems that Etron xHCI host can not perform this command correctly, affecting that USB device.
Instead, to aviod this, xHCI driver should reassign device slot ID by calling xhci_free_dev() and then xhci_alloc_dev(), the effect is the same.
How is freeing and then allocating the device doing anything?
Add XHCI_ETRON_HOST quirk flag to invoke workaround in xhci_discover_or_reset_device().
Cc: stable@vger.kernel.org Signed-off-by: Kuangyi Chiang ki.chiang65@gmail.com
drivers/usb/host/xhci-pci.c | 2 ++ drivers/usb/host/xhci.c | 11 ++++++++++- drivers/usb/host/xhci.h | 2 ++ 3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 05881153883e..c7a88340a6f8 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -395,11 +395,13 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_BROKEN_STREAMS;
xhci->quirks |= XHCI_ETRON_HOST;xhci->quirks |= XHCI_ETRON_HOST;if (pdev->vendor == PCI_VENDOR_ID_RENESAS && diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 37eb37b0affa..aba4164b0873 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3752,6 +3752,15 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, SLOT_STATE_DISABLED) return 0;
- if (xhci->quirks & XHCI_ETRON_HOST) {
xhci_free_dev(hcd, udev);ret = xhci_alloc_dev(hcd, udev);
Wait, why are you freeing and then allocating the same device? That needs a lot of documentation here.
if (ret == 1)return 0;
And why does the function return 1?
elsereturn -EINVAL;- }
- trace_xhci_discover_or_reset_device(slot_ctx);
xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); @@ -3862,7 +3871,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
- disconnected, and all traffic has been stopped and the endpoints have been
- disabled. Free any HC data structures associated with that device.
*/ -static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) +void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
Why is this now global if you are only calling it in the same file?
{ struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_virt_device *virt_dev; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 30415158ed3c..f46b4dcb0613 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1627,6 +1627,7 @@ struct xhci_hcd { #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) #define XHCI_ZHAOXIN_HOST BIT_ULL(46) +#define XHCI_ETRON_HOST BIT_ULL(47)
Defining bit quirks just based on the vendor seems wrong to me, as that information can be determined when needed at any time just by the pci id, right? So why is a quirk bit needed?
Shouldn't the quirk bit say what the broken functionality is? Same probably for the XHCI_ZHAOXIN_HOST, but that's not your issue to solve...
unsigned int num_active_eps; unsigned int limit_active_eps; @@ -1863,6 +1864,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg); irqreturn_t xhci_irq(struct usb_hcd *hcd); irqreturn_t xhci_msi_irq(int irq, void *hcd); int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); +void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
Should not be needed.
thanks,
greg k-h