6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Dybcio konrad.dybcio@linaro.org
[ Upstream commit 647380e41520c7dbd651ebf0d9fd7dfa4928f42d ]
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio konrad.dybcio@linaro.org Signed-off-by: Bjorn Andersson andersson@kernel.org Link: https://lore.kernel.org/r/20230102094642.74254-2-konrad.dybcio@linaro.org Stable-dep-of: 5c0dbe8b0584 ("arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 55f685f51c71..43a948b64007 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -146,7 +146,7 @@ reserved-memory { ranges;
rpm_msg_ram: memory@60000 { - reg = <0x0 0x60000 0x0 0x6000>; + reg = <0x0 0x00060000 0x0 0x6000>; no-map; };
@@ -181,7 +181,7 @@ soc: soc {
prng: qrng@e1000 { compatible = "qcom,prng-ee"; - reg = <0x0 0xe3000 0x0 0x1000>; + reg = <0x0 0x000e3000 0x0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; @@ -388,7 +388,7 @@ v2m@0 {
pcie_phy: phy@84000 { compatible = "qcom,ipq6018-qmp-pcie-phy"; - reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */ + reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -404,10 +404,10 @@ pcie_phy: phy@84000 { "common";
pcie_phy0: phy@84200 { - reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ - <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ - <0x0 0x84800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ - <0x0 0x84c00 0x0 0xf4>; /* pcs_misc */ + reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ + <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ + <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ + <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ #phy-cells = <0>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>; @@ -629,7 +629,7 @@ mdio: mdio@90000 { #address-cells = <1>; #size-cells = <0>; compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; - reg = <0x0 0x90000 0x0 0x64>; + reg = <0x0 0x00090000 0x0 0x64>; clocks = <&gcc GCC_MDIO_AHB_CLK>; clock-names = "gcc_mdio_ahb_clk"; status = "disabled"; @@ -637,7 +637,7 @@ mdio: mdio@90000 {
qusb_phy_1: qusb@59000 { compatible = "qcom,ipq6018-qusb2-phy"; - reg = <0x0 0x059000 0x0 0x180>; + reg = <0x0 0x00059000 0x0 0x180>; #phy-cells = <0>;
clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, @@ -670,7 +670,7 @@ usb2: usb@70f8800 {
dwc_1: usb@7000000 { compatible = "snps,dwc3"; - reg = <0x0 0x7000000 0x0 0xcd00>; + reg = <0x0 0x07000000 0x0 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_1>; phy-names = "usb2-phy"; @@ -685,7 +685,7 @@ dwc_1: usb@7000000 {
ssphy_0: ssphy@78000 { compatible = "qcom,ipq6018-qmp-usb3-phy"; - reg = <0x0 0x78000 0x0 0x1c4>; + reg = <0x0 0x00078000 0x0 0x1c4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -714,7 +714,7 @@ usb0_ssphy: phy@78200 {
qusb_phy_0: qusb@79000 { compatible = "qcom,ipq6018-qusb2-phy"; - reg = <0x0 0x079000 0x0 0x180>; + reg = <0x0 0x00079000 0x0 0x180>; #phy-cells = <0>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,