From: Alain Volmat alain.volmat@foss.st.com
[ Upstream commit 3d6a3d3a2a7a3a60a824e7c04e95fd50dec57812 ]
The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat alain.volmat@foss.st.com Signed-off-by: Pierre-Yves MORDRET pierre-yves.mordret@foss.st.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-stm32f7.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index 14f60751729e7..9768921a164c0 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -42,6 +42,8 @@
/* STM32F7 I2C control 1 */ #define STM32F7_I2C_CR1_ANFOFF BIT(12) +#define STM32F7_I2C_CR1_DNF_MASK GENMASK(11, 8) +#define STM32F7_I2C_CR1_DNF(n) (((n) & 0xf) << 8) #define STM32F7_I2C_CR1_ERRIE BIT(7) #define STM32F7_I2C_CR1_TCIE BIT(6) #define STM32F7_I2C_CR1_STOPIE BIT(5) @@ -95,7 +97,7 @@ #define STM32F7_I2C_MAX_LEN 0xff
#define STM32F7_I2C_DNF_DEFAULT 0 -#define STM32F7_I2C_DNF_MAX 16 +#define STM32F7_I2C_DNF_MAX 15
#define STM32F7_I2C_ANALOG_FILTER_ENABLE 1 #define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */ @@ -543,6 +545,13 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev) else stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_ANFOFF); + + /* Program the Digital Filter */ + stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, + STM32F7_I2C_CR1_DNF_MASK); + stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, + STM32F7_I2C_CR1_DNF(i2c_dev->setup.dnf)); + stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_PE); }