It is not clear what pixel format is actually configured in hardware on reset. MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the driver was intiially submitted, is for sure not the one.
Fix it by explicitly applying a known, driver default frame format just after initial device reset.
Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik jmkrzyszt@gmail.com Cc: stable@vger.kernel.org --- drivers/media/i2c/ov6650.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c index e72210653f55..8013afea0c02 100644 --- a/drivers/media/i2c/ov6650.c +++ b/drivers/media/i2c/ov6650.c @@ -920,6 +920,11 @@ static int ov6650_video_probe(struct v4l2_subdev *sd) ret = ov6650_reset(client); if (!ret) ret = ov6650_prog_dflt(client); + if (!ret) { + struct v4l2_mbus_framefmt mf = ov6650_def_fmt; + + ret = ov6650_s_fmt(sd, &mf); + } if (!ret) ret = v4l2_ctrl_handler_setup(&priv->hdl);
@@ -1074,8 +1079,6 @@ static int ov6650_probe(struct i2c_client *client, priv->rect.top = DEF_VSTRT << 1; priv->rect.width = W_CIF; priv->rect.height = H_CIF; - priv->half_scale = false; - priv->code = MEDIA_BUS_FMT_YUYV8_2X8;
priv->subdev.internal_ops = &ov6650_internal_ops; priv->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;