The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x f4ecdc352646f7d23f348e5c544dbe3212c94fc8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025061707-putt-mutable-5fb5@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f4ecdc352646f7d23f348e5c544dbe3212c94fc8 Mon Sep 17 00:00:00 2001 From: Pawel Laszczak pawell@cadence.com Date: Tue, 13 May 2025 05:30:09 +0000 Subject: [PATCH] usb: cdnsp: Fix issue with detecting command completion event
In some cases, there is a small-time gap in which CMD_RING_BUSY can be cleared by controller but adding command completion event to event ring will be delayed. As the result driver will return error code.
This behavior has been detected on usbtest driver (test 9) with configuration including ep1in/ep1out bulk and ep2in/ep2out isoc endpoint.
Probably this gap occurred because controller was busy with adding some other events to event ring.
The CMD_RING_BUSY is cleared to '0' when the Command Descriptor has been executed and not when command completion event has been added to event ring.
To fix this issue for this test the small delay is sufficient less than 10us) but to make sure the problem doesn't happen again in the future the patch introduces 10 retries to check with delay about 20us before returning error code.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable stable@kernel.org Signed-off-by: Pawel Laszczak pawell@cadence.com Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/PH7PR07MB9538AA45362ACCF1B94EE9B7DD96A@PH7PR07MB95... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c index cd1e00daf43f..55f95f41b3b4 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.c +++ b/drivers/usb/cdns3/cdnsp-gadget.c @@ -548,6 +548,7 @@ int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev) dma_addr_t cmd_deq_dma; union cdnsp_trb *event; u32 cycle_state; + u32 retry = 10; int ret, val; u64 cmd_dma; u32 flags; @@ -579,8 +580,23 @@ int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev) flags = le32_to_cpu(event->event_cmd.flags);
/* Check the owner of the TRB. */ - if ((flags & TRB_CYCLE) != cycle_state) + if ((flags & TRB_CYCLE) != cycle_state) { + /* + * Give some extra time to get chance controller + * to finish command before returning error code. + * Checking CMD_RING_BUSY is not sufficient because + * this bit is cleared to '0' when the Command + * Descriptor has been executed by controller + * and not when command completion event has + * be added to event ring. + */ + if (retry--) { + udelay(20); + continue; + } + return -EINVAL; + }
cmd_dma = le64_to_cpu(event->event_cmd.cmd_trb);