From: Hardik Gajjar hgajjar@de.adit-jv.com
commit 1208f9e1d758c991b0a46a1bd60c616b906bbe27 upstream.
Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able to detect the USB3.0 mass storage devices or is detecting those as USB2.0 high speed devices.
The explanation given by Renesas is that, due to a HW issue, the XHCI driver does not wake up after going to sleep on connecting a USB3.0 device.
In order to mitigate that, disable the auto-suspend feature specifically for SMSC hubs from hub_probe() function, as a quirk.
Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power, configurable hub controller.
[1] SanDisk USB 3.0 device detected as USB-2.0 before the patch [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.077303] usb 5-1.1: Product: Ultra [ 74.080980] usb 5-1.1: Manufacturer: SanDisk [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550
[2] SanDisk USB 3.0 device detected as USB-3.0 after the patch [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 34.604430] usb 6-1.1: Product: Ultra [ 34.608110] usb 6-1.1: Manufacturer: SanDisk [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550
Suggested-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Hardik Gajjar hgajjar@de.adit-jv.com Acked-by: Alan Stern stern@rowland.harvard.edu Tested-by: Eugeniu Rosca erosca@de.adit-jv.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/core/hub.c | 15 +++++++++++++++ drivers/usb/core/hub.h | 1 + 2 files changed, 16 insertions(+)
--- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -37,7 +37,9 @@ #include "otg_whitelist.h"
#define USB_VENDOR_GENESYS_LOGIC 0x05e3 +#define USB_VENDOR_SMSC 0x0424 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01 +#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
#define USB_TP_TRANSMISSION_DELAY 40 /* ns */ #define USB_TP_TRANSMISSION_DELAY_MAX 65535 /* ns */ @@ -1725,6 +1727,10 @@ static void hub_disconnect(struct usb_in kfree(hub->buffer);
pm_suspend_ignore_children(&intf->dev, false); + + if (hub->quirk_disable_autosuspend) + usb_autopm_put_interface(intf); + kref_put(&hub->kref, hub_release); }
@@ -1857,6 +1863,11 @@ static int hub_probe(struct usb_interfac if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND) hub->quirk_check_port_auto_suspend = 1;
+ if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) { + hub->quirk_disable_autosuspend = 1; + usb_autopm_get_interface(intf); + } + if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) return 0;
@@ -5479,6 +5490,10 @@ out_hdev_lock: }
static const struct usb_device_id hub_id_table[] = { + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS, + .idVendor = USB_VENDOR_SMSC, + .bInterfaceClass = USB_CLASS_HUB, + .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND}, { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS, .idVendor = USB_VENDOR_GENESYS_LOGIC, --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -61,6 +61,7 @@ struct usb_hub { unsigned quiescing:1; unsigned disconnected:1; unsigned in_reset:1; + unsigned quirk_disable_autosuspend:1;
unsigned quirk_check_port_auto_suspend:1;