The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo.
This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ.
This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively.
Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij linus.walleij@linaro.org --- drivers/gpu/drm/tve200/tve200_display.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tve200/tve200_display.c b/drivers/gpu/drm/tve200/tve200_display.c index d733bbc4ac0e..17ff24d999d1 100644 --- a/drivers/gpu/drm/tve200/tve200_display.c +++ b/drivers/gpu/drm/tve200/tve200_display.c @@ -14,6 +14,7 @@ #include <linux/version.h> #include <linux/dma-buf.h> #include <linux/of_graph.h> +#include <linux/delay.h>
#include <drm/drm_fb_cma_helper.h> #include <drm/drm_fourcc.h> @@ -130,9 +131,25 @@ static void tve200_display_enable(struct drm_simple_display_pipe *pipe, struct drm_connector *connector = priv->connector; u32 format = fb->format->format; u32 ctrl1 = 0; + int retries;
clk_prepare_enable(priv->clk);
+ /* Reset the TVE200 and wait for it to come back online */ + writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4); + for (retries = 0; retries < 5; retries++) { + usleep_range(30000, 50000); + if (readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET) + continue; + else + break; + } + if (retries == 5 && + readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET) { + dev_err(drm->dev, "can't get hardware out of reset\n"); + return; + } + /* Function 1 */ ctrl1 |= TVE200_CTRL_CSMODE; /* Interlace mode for CCIR656: parameterize? */ @@ -230,8 +247,9 @@ static void tve200_display_disable(struct drm_simple_display_pipe *pipe)
drm_crtc_vblank_off(crtc);
- /* Disable and Power Down */ + /* Disable put into reset and Power Down */ writel(0, priv->regs + TVE200_CTRL); + writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4);
clk_disable_unprepare(priv->clk); } @@ -279,6 +297,8 @@ static int tve200_display_enable_vblank(struct drm_simple_display_pipe *pipe) struct drm_device *drm = crtc->dev; struct tve200_drm_dev_private *priv = drm->dev_private;
+ /* Clear any IRQs and enable */ + writel(0xFF, priv->regs + TVE200_INT_CLR); writel(TVE200_INT_V_STATUS, priv->regs + TVE200_INT_EN); return 0; }