On Monday, April 16, 2018 4:52:40 PM CEST Paweł Chmiel wrote:
All banks with GPIO interrupts should be at beginning of bank array and without any other types of banks between them. This order is expected by exynos_eint_gpio_irq, when doing interrupt group to bank translation. Otherwise, kernel NULL pointer dereference would happen when trying to handle interrupt, due to wrong bank being looked up. Observed on s5pv210, when trying to handle gpj0 interrupt, where kernel was mapping it to gpi bank.
Cc: stable@vger.kernel.org Fixes: cfa76ddf5b3aad642cc904daa3d3784cbb5f2d57 ("pinctrl: samsung: Split Exynos drivers per ARMv7 and ARMv8") Signed-off-by: Paweł Chmiel pawel.mikolaj.chmiel@gmail.com
Changes from v1:
- Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later.
drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c index 90c2744..4f4ae66 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c @@ -105,12 +105,12 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = { EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38), EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c), EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40),
- EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44), EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48), EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50), EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54),
- EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"), EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"), EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"),
@@ -630,7 +630,6 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20), EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24), EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
- EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c), EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30), EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
@@ -641,6 +640,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48), EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c), EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
- EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"), EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"), EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"), EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
Hi Both patches shouldn't be send yet to this list. Sorry for problems.
Best regards Paweł