From: Francesco Dolcini francesco.dolcini@toradex.com
Add fsl,pps-channel property to select where to connect the PPS signal. This depends on the internal SoC routing and on the board, for example on the i.MX8 SoC it can be connected to an external pin (using channel 1) or to internal eDMA as DMA request (channel 0).
Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com Acked-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Paolo Abeni pabeni@redhat.com --- Documentation/devicetree/bindings/net/fsl,fec.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index 5536c06139ca..24e863fdbdab 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -183,6 +183,13 @@ properties: description: Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
+ fsl,pps-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Specifies to which timer instance the PPS signal is routed. + enum: [0, 1, 2, 3] + mdio: $ref: mdio.yaml# unevaluatedProperties: false