4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit f1f90e254e46e0a14220e4090041f68256fbe297 upstream.
The macros PCI_EXP_LNKCAP_SLS_*GB are values, not bit masks. We must mask the register and compare it against them.
This fixes errors like this:
amdgpu: [powerplay] failed to send message 261 ret is 0
when a PCIe-v3 card is plugged into a PCIe-v1 slot, because the slot is being incorrectly reported as PCIe-v3 capable.
6cf57be0f78e, which appeared in v4.17, added pcie_get_speed_cap() with the incorrect test of PCI_EXP_LNKCAP_SLS as a bitmask. 5d9a63304032, which appeared in v4.19, changed amdgpu to use pcie_get_speed_cap(), so the amdgpu bug reports below are regressions in v4.19.
Fixes: 6cf57be0f78e ("PCI: Add pcie_get_speed_cap() to find max supported link speed") Fixes: 5d9a63304032 ("drm/amdgpu: use pcie functions for link width and speed") Link: https://bugs.freedesktop.org/show_bug.cgi?id=108704 Link: https://bugs.freedesktop.org/show_bug.cgi?id=108778 Signed-off-by: Mikulas Patocka mpatocka@redhat.com [bhelgaas: update comment, remove use of PCI_EXP_LNKCAP_SLS_8_0GB and PCI_EXP_LNKCAP_SLS_16_0GB since those should be covered by PCI_EXP_LNKCAP2, remove test of PCI_EXP_LNKCAP for zero, since that register is required] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Acked-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/pci/pci.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-)
--- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5473,9 +5473,13 @@ enum pci_bus_speed pcie_get_speed_cap(st u32 lnkcap2, lnkcap;
/* - * PCIe r4.0 sec 7.5.3.18 recommends using the Supported Link - * Speeds Vector in Link Capabilities 2 when supported, falling - * back to Max Link Speed in Link Capabilities otherwise. + * Link Capabilities 2 was added in PCIe r3.0, sec 7.8.18. The + * implementation note there recommends using the Supported Link + * Speeds Vector in Link Capabilities 2 when supported. + * + * Without Link Capabilities 2, i.e., prior to PCIe r3.0, software + * should use the Supported Link Speeds field in Link Capabilities, + * where only 2.5 GT/s and 5.0 GT/s speeds were defined. */ pcie_capability_read_dword(dev, PCI_EXP_LNKCAP2, &lnkcap2); if (lnkcap2) { /* PCIe r3.0-compliant */ @@ -5491,16 +5495,10 @@ enum pci_bus_speed pcie_get_speed_cap(st }
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); - if (lnkcap) { - if (lnkcap & PCI_EXP_LNKCAP_SLS_16_0GB) - return PCIE_SPEED_16_0GT; - else if (lnkcap & PCI_EXP_LNKCAP_SLS_8_0GB) - return PCIE_SPEED_8_0GT; - else if (lnkcap & PCI_EXP_LNKCAP_SLS_5_0GB) - return PCIE_SPEED_5_0GT; - else if (lnkcap & PCI_EXP_LNKCAP_SLS_2_5GB) - return PCIE_SPEED_2_5GT; - } + if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_5_0GB) + return PCIE_SPEED_5_0GT; + else if ((lnkcap & PCI_EXP_LNKCAP_SLS) == PCI_EXP_LNKCAP_SLS_2_5GB) + return PCIE_SPEED_2_5GT;
return PCI_SPEED_UNKNOWN; }