From: Fenglin Wu quic_fenglinw@quicinc.com
[ Upstream commit a0864cf32044233e56247fa0eed3ac660f15db9e ]
The flash module has status bits to indicate different thermal conditions which are called as OTSTx. For each OTSTx status, there is a recommended total flash current for all channels to prevent the flash module entering into higher thermal level. For example, the total flash current should be limited to 1000mA/500mA respectively when the HW reaches the OTST1/OTST2 thermal level.
Signed-off-by: Fenglin Wu quic_fenglinw@quicinc.com Link: https://lore.kernel.org/r/20240705-qcom_flash_thermal_derating-v3-1-8e2e2783... Signed-off-by: Lee Jones lee@kernel.org Stable-dep-of: fab15f57360b ("leds: flash: leds-qcom-flash: Fix registry access after re-bind") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/leds/flash/leds-qcom-flash.c | 163 ++++++++++++++++++++++++++- 1 file changed, 162 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c index 17391aefeb94..7df4e8426528 100644 --- a/drivers/leds/flash/leds-qcom-flash.c +++ b/drivers/leds/flash/leds-qcom-flash.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2022, 2024 Qualcomm Innovation Center, Inc. All rights reserved. */
#include <linux/bitfield.h> @@ -14,6 +14,9 @@ #include <media/v4l2-flash-led-class.h>
/* registers definitions */ +#define FLASH_REVISION_REG 0x00 +#define FLASH_4CH_REVISION_V0P1 0x01 + #define FLASH_TYPE_REG 0x04 #define FLASH_TYPE_VAL 0x18
@@ -73,6 +76,16 @@
#define UA_PER_MA 1000
+/* thermal threshold constants */ +#define OTST_3CH_MIN_VAL 3 +#define OTST1_4CH_MIN_VAL 0 +#define OTST1_4CH_V0P1_MIN_VAL 3 +#define OTST2_4CH_MIN_VAL 0 + +#define OTST1_MAX_CURRENT_MA 1000 +#define OTST2_MAX_CURRENT_MA 500 +#define OTST3_MAX_CURRENT_MA 200 + enum hw_type { QCOM_MVFLASH_3CH, QCOM_MVFLASH_4CH, @@ -98,6 +111,9 @@ enum { REG_IRESOLUTION, REG_CHAN_STROBE, REG_CHAN_EN, + REG_THERM_THRSH1, + REG_THERM_THRSH2, + REG_THERM_THRSH3, REG_MAX_COUNT, };
@@ -111,6 +127,9 @@ static struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = { REG_FIELD(0x47, 0, 5), /* iresolution */ REG_FIELD_ID(0x49, 0, 2, 3, 1), /* chan_strobe */ REG_FIELD(0x4c, 0, 2), /* chan_en */ + REG_FIELD(0x56, 0, 2), /* therm_thrsh1 */ + REG_FIELD(0x57, 0, 2), /* therm_thrsh2 */ + REG_FIELD(0x58, 0, 2), /* therm_thrsh3 */ };
static struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = { @@ -123,6 +142,8 @@ static struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = { REG_FIELD(0x49, 0, 3), /* iresolution */ REG_FIELD_ID(0x4a, 0, 6, 4, 1), /* chan_strobe */ REG_FIELD(0x4e, 0, 3), /* chan_en */ + REG_FIELD(0x7a, 0, 2), /* therm_thrsh1 */ + REG_FIELD(0x78, 0, 2), /* therm_thrsh2 */ };
struct qcom_flash_data { @@ -130,9 +151,11 @@ struct qcom_flash_data { struct regmap_field *r_fields[REG_MAX_COUNT]; struct mutex lock; enum hw_type hw_type; + u32 total_ma; u8 leds_count; u8 max_channels; u8 chan_en_bits; + u8 revision; };
struct qcom_flash_led { @@ -143,6 +166,7 @@ struct qcom_flash_led { u32 max_timeout_ms; u32 flash_current_ma; u32 flash_timeout_ms; + u32 current_in_use_ma; u8 *chan_id; u8 chan_count; bool enabled; @@ -172,6 +196,127 @@ static int set_flash_module_en(struct qcom_flash_led *led, bool en) return rc; }
+static int update_allowed_flash_current(struct qcom_flash_led *led, u32 *current_ma, bool strobe) +{ + struct qcom_flash_data *flash_data = led->flash_data; + u32 therm_ma, avail_ma, thrsh[3], min_thrsh, sts; + int rc = 0; + + mutex_lock(&flash_data->lock); + /* + * Put previously allocated current into allowed budget in either of these two cases: + * 1) LED is disabled; + * 2) LED is enabled repeatedly + */ + if (!strobe || led->current_in_use_ma != 0) { + if (flash_data->total_ma >= led->current_in_use_ma) + flash_data->total_ma -= led->current_in_use_ma; + else + flash_data->total_ma = 0; + + led->current_in_use_ma = 0; + if (!strobe) + goto unlock; + } + + /* + * Cache the default thermal threshold settings, and set them to the lowest levels before + * reading over-temp real time status. If over-temp has been triggered at the lowest + * threshold, it's very likely that it would be triggered at a higher (default) threshold + * when more flash current is requested. Prevent device from triggering over-temp condition + * by limiting the flash current for the new request. + */ + rc = regmap_field_read(flash_data->r_fields[REG_THERM_THRSH1], &thrsh[0]); + if (rc < 0) + goto unlock; + + rc = regmap_field_read(flash_data->r_fields[REG_THERM_THRSH2], &thrsh[1]); + if (rc < 0) + goto unlock; + + if (flash_data->hw_type == QCOM_MVFLASH_3CH) { + rc = regmap_field_read(flash_data->r_fields[REG_THERM_THRSH3], &thrsh[2]); + if (rc < 0) + goto unlock; + } + + min_thrsh = OTST_3CH_MIN_VAL; + if (flash_data->hw_type == QCOM_MVFLASH_4CH) + min_thrsh = (flash_data->revision == FLASH_4CH_REVISION_V0P1) ? + OTST1_4CH_V0P1_MIN_VAL : OTST1_4CH_MIN_VAL; + + rc = regmap_field_write(flash_data->r_fields[REG_THERM_THRSH1], min_thrsh); + if (rc < 0) + goto unlock; + + if (flash_data->hw_type == QCOM_MVFLASH_4CH) + min_thrsh = OTST2_4CH_MIN_VAL; + + /* + * The default thermal threshold settings have been updated hence + * restore them if any fault happens starting from here. + */ + rc = regmap_field_write(flash_data->r_fields[REG_THERM_THRSH2], min_thrsh); + if (rc < 0) + goto restore; + + if (flash_data->hw_type == QCOM_MVFLASH_3CH) { + rc = regmap_field_write(flash_data->r_fields[REG_THERM_THRSH3], min_thrsh); + if (rc < 0) + goto restore; + } + + /* Read thermal level status to get corresponding derating flash current */ + rc = regmap_field_read(flash_data->r_fields[REG_STATUS2], &sts); + if (rc) + goto restore; + + therm_ma = FLASH_TOTAL_CURRENT_MAX_UA / 1000; + if (flash_data->hw_type == QCOM_MVFLASH_3CH) { + if (sts & FLASH_STS_3CH_OTST3) + therm_ma = OTST3_MAX_CURRENT_MA; + else if (sts & FLASH_STS_3CH_OTST2) + therm_ma = OTST2_MAX_CURRENT_MA; + else if (sts & FLASH_STS_3CH_OTST1) + therm_ma = OTST1_MAX_CURRENT_MA; + } else { + if (sts & FLASH_STS_4CH_OTST2) + therm_ma = OTST2_MAX_CURRENT_MA; + else if (sts & FLASH_STS_4CH_OTST1) + therm_ma = OTST1_MAX_CURRENT_MA; + } + + /* Calculate the allowed flash current for the request */ + if (therm_ma <= flash_data->total_ma) + avail_ma = 0; + else + avail_ma = therm_ma - flash_data->total_ma; + + *current_ma = min_t(u32, *current_ma, avail_ma); + led->current_in_use_ma = *current_ma; + flash_data->total_ma += led->current_in_use_ma; + + dev_dbg(led->flash.led_cdev.dev, "allowed flash current: %dmA, total current: %dmA\n", + led->current_in_use_ma, flash_data->total_ma); + +restore: + /* Restore to default thermal threshold settings */ + rc = regmap_field_write(flash_data->r_fields[REG_THERM_THRSH1], thrsh[0]); + if (rc < 0) + goto unlock; + + rc = regmap_field_write(flash_data->r_fields[REG_THERM_THRSH2], thrsh[1]); + if (rc < 0) + goto unlock; + + if (flash_data->hw_type == QCOM_MVFLASH_3CH) + rc = regmap_field_write(flash_data->r_fields[REG_THERM_THRSH3], thrsh[2]); + +unlock: + mutex_unlock(&flash_data->lock); + return rc; +} + static int set_flash_current(struct qcom_flash_led *led, u32 current_ma, enum led_mode mode) { struct qcom_flash_data *flash_data = led->flash_data; @@ -313,6 +458,10 @@ static int qcom_flash_strobe_set(struct led_classdev_flash *fled_cdev, bool stat if (rc) return rc;
+ rc = update_allowed_flash_current(led, &led->flash_current_ma, state); + if (rc < 0) + return rc; + rc = set_flash_current(led, led->flash_current_ma, FLASH_MODE); if (rc) return rc; @@ -429,6 +578,10 @@ static int qcom_flash_led_brightness_set(struct led_classdev *led_cdev, if (rc) return rc;
+ rc = update_allowed_flash_current(led, ¤t_ma, enable); + if (rc < 0) + return rc; + rc = set_flash_current(led, current_ma, TORCH_MODE); if (rc) return rc; @@ -707,6 +860,14 @@ static int qcom_flash_led_probe(struct platform_device *pdev) flash_data->hw_type = QCOM_MVFLASH_4CH; flash_data->max_channels = 4; regs = mvflash_4ch_regs; + + rc = regmap_read(regmap, reg_base + FLASH_REVISION_REG, &val); + if (rc < 0) { + dev_err(dev, "Failed to read flash LED module revision, rc=%d\n", rc); + return rc; + } + + flash_data->revision = val; } else { dev_err(dev, "flash LED subtype %#x is not yet supported\n", val); return -ENODEV;