4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada yamada.masahiro@socionext.com
commit 3f6e6986045d47f87bd982910821b7ab9758487e upstream.
Since commit 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()"), denali_dt.c gets the clock rate from the clock driver. The driver expects the frequency of the bus interface clock, whereas the clock driver of SOCFPGA provides the core clock. Thus, the setup_data_interface() hook calculates timing parameters based on a wrong frequency.
To make it work without relying on the clock driver, hard-code the clock frequency, 200MHz. This is fine for existing DT of UniPhier, and also fixes the issue of SOCFPGA because both platforms use 200 MHz for the bus interface clock.
Fixes: 1bb88666775e ("mtd: nand: denali: handle timing parameters by setup_data_interface()") Cc: linux-stable stable@vger.kernel.org #4.14+ Reported-by: Philipp Rosenberger p.rosenberger@linutronix.de Suggested-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Tested-by: Richard Weinberger richard@nod.at Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mtd/nand/denali_dt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -122,7 +122,11 @@ static int denali_dt_probe(struct platfo if (ret) return ret;
- denali->clk_x_rate = clk_get_rate(dt->clk); + /* + * Hardcode the clock rate for the backward compatibility. + * This works for both SOCFPGA and UniPhier. + */ + denali->clk_x_rate = 200000000;
ret = denali_init(denali); if (ret)