Sanity on phy_mask was added by Tomas through [1]. It causes warning messages when >64 phys are detected (expander can have >64 phys) and devices connected to phys greater than 64 are dropped. phy_mask bitmap is only needed for controller phys(not required for expander phys).Controller phys can go maximum up to 64 and u64 is good enough to contain phy_mask bitmap.
To suppress those warnings and allow devices to be discovered as before the [1], restrict the phy_mask setting and lowest phy setting only to the controller phys.
[1]:https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/commit/ drivers/scsi/mpi3mr?h=6.12/ scsi-queue&id=3668651def2c1622904e58b0280ee93121f2b10b
Fixes: 3668651def2c ("mpi3mr: Sanitise num_phys") Cc: stable@vger.kernel.org Reported-by: Alexander Motin mav@ixsystems.com Signed-off-by: Ranjan Kumar ranjan.kumar@broadcom.com --- drivers/scsi/mpi3mr/mpi3mr.h | 4 +-- drivers/scsi/mpi3mr/mpi3mr_transport.c | 39 +++++++++++++++++--------- 2 files changed, 27 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h index dc2cdd5f0311..3822efe349e1 100644 --- a/drivers/scsi/mpi3mr/mpi3mr.h +++ b/drivers/scsi/mpi3mr/mpi3mr.h @@ -541,8 +541,8 @@ struct mpi3mr_hba_port { * @port_list: List of ports belonging to a SAS node * @num_phys: Number of phys associated with port * @marked_responding: used while refresing the sas ports - * @lowest_phy: lowest phy ID of current sas port - * @phy_mask: phy_mask of current sas port + * @lowest_phy: lowest phy ID of current sas port, valid for controller port + * @phy_mask: phy_mask of current sas port, valid for controller port * @hba_port: HBA port entry * @remote_identify: Attached device identification * @rphy: SAS transport layer rphy object diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c index ccd23def2e0c..3a685750f5cd 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_transport.c +++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c @@ -595,7 +595,7 @@ static enum sas_linkrate mpi3mr_convert_phy_link_rate(u8 link_rate) */ static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc, struct mpi3mr_sas_port *mr_sas_port, - struct mpi3mr_sas_phy *mr_sas_phy) + struct mpi3mr_sas_phy *mr_sas_phy, u8 host_node) { u64 sas_address = mr_sas_port->remote_identify.sas_address;
@@ -605,9 +605,13 @@ static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
list_del(&mr_sas_phy->port_siblings); mr_sas_port->num_phys--; - mr_sas_port->phy_mask &= ~(1 << mr_sas_phy->phy_id); - if (mr_sas_port->lowest_phy == mr_sas_phy->phy_id) - mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + + if (host_node) { + mr_sas_port->phy_mask &= ~(1 << mr_sas_phy->phy_id); + + if (mr_sas_port->lowest_phy == mr_sas_phy->phy_id) + mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + } sas_port_delete_phy(mr_sas_port->port, mr_sas_phy->phy); mr_sas_phy->phy_belongs_to_port = 0; } @@ -617,12 +621,13 @@ static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc, * @mrioc: Adapter instance reference * @mr_sas_port: Internal Port object * @mr_sas_phy: Internal Phy object + * @host_node: Flag to indicate this is a host_node * * Return: None. */ static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc, struct mpi3mr_sas_port *mr_sas_port, - struct mpi3mr_sas_phy *mr_sas_phy) + struct mpi3mr_sas_phy *mr_sas_phy, u8 host_node) { u64 sas_address = mr_sas_port->remote_identify.sas_address;
@@ -632,9 +637,12 @@ static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc,
list_add_tail(&mr_sas_phy->port_siblings, &mr_sas_port->phy_list); mr_sas_port->num_phys++; - mr_sas_port->phy_mask |= (1 << mr_sas_phy->phy_id); - if (mr_sas_phy->phy_id < mr_sas_port->lowest_phy) - mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + if (host_node) { + mr_sas_port->phy_mask |= (1 << mr_sas_phy->phy_id); + + if (mr_sas_phy->phy_id < mr_sas_port->lowest_phy) + mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + } sas_port_add_phy(mr_sas_port->port, mr_sas_phy->phy); mr_sas_phy->phy_belongs_to_port = 1; } @@ -675,7 +683,7 @@ static void mpi3mr_add_phy_to_an_existing_port(struct mpi3mr_ioc *mrioc, if (srch_phy == mr_sas_phy) return; } - mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy); + mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy, mr_sas_node->host_node); return; } } @@ -736,7 +744,7 @@ static void mpi3mr_del_phy_from_an_existing_port(struct mpi3mr_ioc *mrioc, mpi3mr_delete_sas_port(mrioc, mr_sas_port); else mpi3mr_delete_sas_phy(mrioc, mr_sas_port, - mr_sas_phy); + mr_sas_phy, mr_sas_node->host_node); return; } } @@ -1367,7 +1375,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc, mpi3mr_sas_port_sanity_check(mrioc, mr_sas_node, mr_sas_port->remote_identify.sas_address, hba_port);
- if (mr_sas_node->num_phys >= sizeof(mr_sas_port->phy_mask) * 8) + if (mr_sas_node->host_node && mr_sas_node->num_phys >= + sizeof(mr_sas_port->phy_mask) * 8) ioc_info(mrioc, "max port count %u could be too high\n", mr_sas_node->num_phys);
@@ -1377,7 +1386,7 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc, (mr_sas_node->phy[i].hba_port != hba_port)) continue;
- if (i >= sizeof(mr_sas_port->phy_mask) * 8) { + if (mr_sas_node->host_node && (i >= sizeof(mr_sas_port->phy_mask) * 8)) { ioc_warn(mrioc, "skipping port %u, max allowed value is %zu\n", i, sizeof(mr_sas_port->phy_mask) * 8); goto out_fail; @@ -1385,7 +1394,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc, list_add_tail(&mr_sas_node->phy[i].port_siblings, &mr_sas_port->phy_list); mr_sas_port->num_phys++; - mr_sas_port->phy_mask |= (1 << i); + if (mr_sas_node->host_node) + mr_sas_port->phy_mask |= (1 << i); }
if (!mr_sas_port->num_phys) { @@ -1394,7 +1404,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc, goto out_fail; }
- mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + if (mr_sas_node->host_node) + mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
if (mr_sas_port->remote_identify.device_type == SAS_END_DEVICE) { tgtdev = mpi3mr_get_tgtdev_by_addr(mrioc,