From: Martin Fuzzey mfuzzey@parkeon.com
The DT binding doc says reset-gpios is an optional property but the code currently bails out if it is omitted.
This is a regression since it breaks previously working device trees. Fix it by restoring the original documented behaviour.
Fixes: ce037275861e ("mmc: pwrseq_simple: use GPIO descriptors array API") Tested-by: Tony Lindgren tony@atomide.com Signed-off-by: Martin Fuzzey mfuzzey@parkeon.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org (cherry picked from commit 64a67d4762ce3ce4c9466eadd152d825fbf84967) Signed-off-by: Arnd Bergmann arnd@arndb.de --- drivers/mmc/core/pwrseq_simple.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 2b16263458af..aba786daebca 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -29,15 +29,18 @@ struct mmc_pwrseq_simple { static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, int value) { - int i; struct gpio_descs *reset_gpios = pwrseq->reset_gpios; - int values[reset_gpios->ndescs];
- for (i = 0; i < reset_gpios->ndescs; i++) - values[i] = value; + if (!IS_ERR(reset_gpios)) { + int i; + int values[reset_gpios->ndescs];
- gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, - values); + for (i = 0; i < reset_gpios->ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep( + reset_gpios->ndescs, reset_gpios->desc, values); + } }
static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) @@ -79,7 +82,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq);
- gpiod_put_array(pwrseq->reset_gpios); + if (!IS_ERR(pwrseq->reset_gpios)) + gpiod_put_array(pwrseq->reset_gpios);
if (!IS_ERR(pwrseq->ext_clk)) clk_put(pwrseq->ext_clk); @@ -112,7 +116,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, }
pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios)) { + if (IS_ERR(pwrseq->reset_gpios) && + PTR_ERR(pwrseq->reset_gpios) != -ENOENT && + PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { ret = PTR_ERR(pwrseq->reset_gpios); goto clk_put; }