Hi, Boris Sorry for the later as for I am in a long vacation. Here how the SR should behave: the status register is updated after each array operation and can be cleared with a reset command. After a read operation the status register bit0 will report the ECC status of the read until a different array operation is performed (erase/program/read) or a reset occurs. The status register bit1 will report the status of the time before last time operation. So, this bit can report a fail (value 1) even if the very last operation was successful (bit0=0 bit1=1).
//beanhuo
Peter, Bean,
Can you confirm this behavior, or ask someone in Micron who can confirm it? Also, if a RESET is actually needed, it would be good to update the datasheet accordingly. And if that's not the case, can you explain why the NAND_STATUS_FAIL bit is stuck and how to clear it (I tried a 0x00 command, A.K.A. READ STATUS EXIT, but it does not clear this bit, ERASE and PROGRAM seem to clear the bit, but that's clearly not the kind of operation I can do when the user asks for a READ)?
Thanks,
Boris